Axial Leaded Power Inductors
Type SC10, SC15, SC30, SC55 Series
Key Features
Wide Inductance Range
Insulated Packaging
Four Sizes
Flame Retardant
Wide Temperature Range
Established Reliability
Fully Protected from the
Environment
Available from
Distribution
TE Connectivity quality and reliability are guaranteed in this range of insulated and
shielded RF Inductors. The insulated range has a self-extinguishing polyolefin sleeve.
Their small size make them ideal for use when space is at a premium. And they are also
fully protected from environmental factors. Electrostatic and electromagnetic screening is
provided by the magnetic enclosure. A wide range of values are available and the self
extinguishing polyolefin sleeve enhances environmental protection. The SC series was
originally designed for military applications but now has widespread industrial use.
Characteristics - Electrical
SC10 SC15 SC30 SC55
Inductance Range: See Table - E12 Grid
(Non-standard values available to special order)
Selection Tolerance: 10% 10% 10% 10%
Power Rating at 70C: 0.33W See Below 0.25W 0.30W
Isolation Voltage: 700V DC or AC peak
Limits of Inductance Change: 5% after 1000 hours endurance
Operating Temperature Range: -55C to +100C -55C to +100C -55C to +100C -55C to +125C
Recommended Storage Temperature: 0C to +35C
Climatic Category: 55/100/21 55/100/21 55/100/21 55/125/21
SC15 Power Rating Values between 0.15uH and 4.7uH - Power Rating 0.33 Watt
Values between 5.6uH and 330uH - Power Rating 0.20 Watt
Packaging and Marking
Type Ammo Pack Reeled Weight per Component Marking
SC10 500 Pieces 1500 Pieces LC10
SC15 500 Pieces 1500 Pieces LC15
SC30 500 Pieces 2500 Pieces LC30
SC55 500 Pieces 1500 Pieces 0.6g LC55
Dimensions
Size L Max. D Max. l Min. d
SC10 10.0mm 4.2mm 25mm 0.6mm
SC15 10.0mm 4.5mm 30mm 0.6mm
SC30 7.0mm 2.8mm 25mm 0.5mm
SC55 11.4mm 5.2mm 30mm 0.6mm
1773282 CIS BI 03/2012 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.Axial Leaded Power Inductors
Type SC10, SC15, SC30, SC55 Series
Characteristics - Electrical - Type SC10 - Section 1
Max. DC Direct Current
Inductance Inductance Test Freq. Q Factor S.R.F.
Resistance at 70C
Value - H Code MHz Min. MHz Min.
Ohms at 20C Max. mA
0.10 R10 25 50 500 0.055 2060
0.12 R12 25 50 475 0.060 1970
0.15 R15 25 50 450 0.065 1900
0.18 R18 25 50 425 0.070 1830
0.22 R22 25 50 400 0.075 1770
0.27 R27 25 50 380 0.085 1660
0.33 R33 25 50 360 0.095 1570
0.39 R39 25 50 330 0.11 1460
0.47 R47 25 50 300 0.12 1390
0.56 R56 25 50 280 0.14 1290
0.68 R68 25 45 260 0.16 1210
0.82 R82 25 45 235 0.26 950
1.0 1R0 25 45 210 0.30 880
1.2 1R2 7.9 32 190 0.50 685
1.5 1R5 7.9 32 170 0.60 625
1.8 1R8 7.9 32 156 0.75 560
2.2 2R2 7.9 32 140 1.10 460
2.7 2R7 7.9 32 125 1.40 410
3.3 3R3 7.9 32 115 1.90 350
Type SC10 - Section 2
Max. DC Direct Current
Inductance Inductance Test Freq. Q Factor S.R.F.
Resistance at 70C
Value - H Code MHz Min. MHz Min.
Ohms at 20C Max. mA
3.9 3R9 7.9 45 75 0.25 970
4.7 4R7 7.9 45 65 0.35 820
5.6 5R6 7.9 45 60 0.40 765
6.8 6R8 7.9 45 55 0.55 650
8.2 8R2 7.9 45 50 0.75 560
10 100 7.9 45 45 0.9 510
12 120 2.5 55 40 1.1 460
15 150 2.5 55 35 1.5 395
18 180 2.5 55 30 2.7 295
22 220 2.5 55 27 3.0 280
27 270 2.5 55 25 4.5 230
33 330 2.5 55 22 5.2 210
39 390 2.5 55 20 7.5 175
47 470 2.5 55 18 9.6 156
Type SC10 - Section 3
Max. DC Direct Current
Inductance Inductance Test Freq. Q Factor S.R.F.
Resistance at 70C
Value - H Code MHz Min. MHz Min.
Ohms at 20C Max. mA
56 560 2.5 55 11 8.1 170
68 680 2.5 55 10
9.0 161
82 820 2.5 50 8.5 10.0 153
100 101 2.5 50 7.0
11.0 146
120 121 0.79 40 6.5 12.0 140
150 151 0.79 40 5.5
13.0 134
180 181 0.79 45 5.0 15.0 125
220 221 0.79 45 4.2
17.0 117
270 271 0.79 45 3.8 19.5 110
330 331 0.79 45 3.3
22.0 103
390 391 0.79 45 3.1 24.5 98
470 471 0.79 45 2.9
26.5 94
560 561 0.79 45 2.7 30.0 88
680 681 0.79 45 2.5
33.0 84
820 821 0.79 45 2.3 36.5 80
1000 102 0.79 40 2.2
40.0 76
Section 1 was formerly the TE Connectivity C10 Series, Section 2 was formerly the TE Connectivity C11 Series,
Section 3 was formerly the TE Connectivity C12 Series
1773282 CIS BI 03/2012 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.