RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 16,66 0,66 PCB EDGE LP 15,88 0,63 LED 1 LED 2 18 11,43 0,13 0,45 0,01 10,89 0,43 203290 XXXX RC NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R). NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5). MATERIALS AND FINISH NO. LED 2 LEFT LED 1 RIGHT LED HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK IDENT. NR. LED 2 LINKS LED 1 RECHTS CODE SHIELDING: Cu ALLOY, PLATED WITH Ni 203290 GREEN GREEN L3 CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 m (30 in) OVER Ni Information: Tolerances Scale 2:1 TERMINAL FINISH: SOLDER SCHEMATIC NUMBER: H3D01 All Dimensions LED LENS: EPOXY in mm in OPERATING TEMPERATURE: -40C TO 85C Designation All rights reserved. Subject to modification without MOD JACK - MJIM Only for Information. prior notice. To insure that this is the latest Drawing will not be updated. version of this drawing, please 8C8T, 1x1, INT. MAG., LED ALIGNED contact one of the ERNI companies before using. I (1/2) www.ERNI.com 133883 B 15.01.2008 A3 Index Date Class MAXMJ Consider protection memo from DIN 34 21,59 0,85 MAX 3,05 0,50 0,12 0,02 0,38 0,10 0,01 0,00 14,72 0,58 13,63 0,54 ELECTRICAL SCHEMATIC - 10/100 BASE TX - H3D01 EXTENDED TERMPERATURE RANGE ELEKTRISCHER SCHALTPLAN PCB CABLE P1 J1 CT P4 P2 J2 P3 J3 CT P5 P6 J6 N/C P7 J4,5 GND P8 J7,8 1000pF/2KV 4X 75 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTCKUNGSSEITE) TOL 0.05 .002 UNLESS NOTED 1,27 0,05 0,64 0,03 2,54 0,10 8 1 11 12 910 8,18 0,32 11,43 0,45 13,26 0,52 MAGNETICS SPECIFICATIONS 25C 15,49 0,61 AUTO MDIX COMPATIBLE TURNS RATIO: (P1-P2:J1-J2) 1CT : 1 3% (P3-P6:J3-J6) 1CT : 1 3% OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2:P3-P6) 350 H MIN DCR (P1-P2:P3-P6) 1.1 OHMS MAX INSERTION LOSS: 0.1-100 MHz -1.1 dB MAX RETURN LOSS: 0.5-30 MHz -18 dB MIN LED SPECIFICATIONS 40 MHz -15.5 dB MIN LED ANWEISUNG 50 MHz -13.6 dB MIN 60-80 MHz -12 dB MIN COLOR VVf f If CIRCUIT DIAGRAM CROSSTALK: 0.1-100 MHz -40 dB TYP FARBE TYP MAX mA SCHALTPLAN CMR: 0.1 - 30 MHz -50 dB TYP GREEN 2.2 2.5 20 9 10 11 12 30 - 60 MHz -40 dB TYP 60 - 100 MHz -35 dB TYP Information: Tolerances Scale 2:1 ISOLATION 1,500 Vrms All Dimensions SCHEMATIC NUMBER: H3D01 in mm in Designation All rights reserved. Subject to modification without MOD JACK - MJIM Only for Information. prior notice. To insure that this is the latest Drawing will not be updated. version of this drawing, please 8C8T, 1x1, INT. MAG., LED ALIGNED contact one of the ERNI companies before using. I (2/2) www.ERNI.com 133883 A3 Class MAXMJ 0,89 0,07 0,04 0,00 X8 1,60 0,07 0,06 0,00 X2 3,25 0,07 0,13 0,00 X2 1,02 0,07 0,04 0,00 X4 Consider protection memo from DIN 34 4,06 0,16 3,05 0,12 2,54 0,10 8,89 0,35