55PC0214 SPECIFICATION CONTROL DRAWING TITLE Date Revision WIRE, RADIATION-CROSSLINKED, MODIFIED, ETFE-INSULATED, 07-09-04 B GENERAL PURPOSE, LIGHT AIRFRAME This specification sheet forms a part of the latest issue of Raychem Specifiction 55PC. CONDUCTOR - SILVER-COATED HIGH INSULATION - RADIATION-CROSSLINKED, STRENGTH COPPER ALLOY MODIFIED ETFE CONSTRUCTION DETAILS FINISHED WIRE CONDUCTOR DIAMETER ( in.) DIAMETER WEIGHT MAXIMUM WIRE CONDUCTOR ( in.) ( lbs/1000 ft. ) RESISTANCE PART NUMBER SIZE STRANDING LOWER UPPER TARGET 1/ AT 20C SPEC LOWER SPEC TARGET UPPER SPEC TARGET (AWG) (number x AWG) SPEC UPPER SPEC VALUE (ohms/1000 ft.) LIMIT LIMIT LIMIT VALUE LIMIT VALUE LIMIT 55PC0214-26-* 26 19 x 38 .0175 .0183 .0191 .0345 .0362 1.52 44.8 .0328 1.38 24 19 x 36 .0225 .0241 55PC0214-24-* .0233 28.4 .0378 .0395 .0412 1.98 2.13 55PC0214-22-* 22 19 x 34 .0285 .0293 .0301 .0455 17.5 .0438 .0472 2.90 3.06 55PC0214-20-* 20 19 x 32 .0365 .0375 .0385 10.7 .0523 .0540 .0557 4.38 4.57 18 19 x 30 .0452 .0464 .0476 55PC0214-18-* 6.8 .0616 .0635 .0654 6.59 6.90 55PC0214-16-* 16 19 x 29 .0514 .0527 .0538 .0710 .0730 8.70 5.3 .0690 8.37 WIRE RATINGS AND ADDITIONAL R EQUIREMENTS TEMPERATURE RATING: 200C INSULATION FLAWS: Maximum continuous conductor temperature Spark Test, 3.0 kV (rms) VOLTAGE RATING: 600 volts (rms) at sea level Impulse Dielectric Test, 8.0 kV (peak) COLOR: White preferred INSULATION THICKNESS: .008 in. (nominal) total insulation CROSSLINK VERIFICATION: 300 3C for 1 hour SHRINKAGE: 230 3C for 1 hour, 0.125 in.(maximum) in 12 in. IDENTIFICATION AND COLOR STRIPING DURABILITY: VOLTAGE WITHSTAND TEST (POST ENVIRONMENTAL): 2500 volts (rms) 125 cycles (250 strokes) (minimum), 500 g weight INSULATION ELONGATION AND TENSILE STRENGTH: PART NUMBER: Total Insulation, The in the part numbers above shall be replaced by color code designators. Elongation, 50% (minimum) 1/ Example: AWG 22, white: 55PC0214-22-9 Tensile Strength, 5000 lbf/in (minimum) AWG 22, white with black stripe: 55PC0214-22-90 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. RRR Wire & Cable RR 501 Oakside Avenue DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL Redwood City, CA 94063-3800 Page 1 of 1 Phone: 1-800-227-8816 Fax: 1-650-361-6297 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.