6-1393238-4 TE Connectivity

General Purpose Relays SCHRACK Power PCB Relay RT1 1 pole 12 / 16 A, 1 CO or 1 NO contact DC- or AC-coil Sensitive coil 400 mW 5 kV / 10 mm coil-contact, reinforced insulation Ambient temperature 85C (DC-coil) WG version: Product in accordance to IEC60335-1 Applications Boiler control, timers, garage door control, POS automation, F0144-C interface modules Approvals V REG.-Nr. 6106,Z E214025, b 14385, B C0786 Technical data of approved types on request Contact data Contact configuration 1 CO or 1 NO contact Contact set single contact Type of interruption micro disconnection Rated voltage / max. switching voltage AC 250 / 400 VAC Rated current 12 A 16 A Limiting continuous current 12 A 16 A, UL: 20 A Maximum breaking capacity AC 3000 VA 4000 VA Limiting making capacity, max 4 s, df 10% 25 A 30 A Contact material AgNi 90/10, AgNi 90/10 gold plated -1 Rated frequency of operation with / without load DC coil: 6 / 1200 min -1 AC coil: 6 / 600 min Operate- / release time DC coil max 8 / 6 ms Bounce time DC coil, NO / NC contact max 4 / 6 ms Contact ratings Type Contact Load Ambient Cycles temp. C IEC 61810 3 RT314 DC-coil NO 16 A, 250 VAC, cos=1 85C 30x10 3 RT314 DC-coil CO 16 A, 250 VAC, cos=1 85C 10x10 3 RT314 DC-coil NO 10 A, 400 VAC, cos=1 85C 150x10 3 RT114 DC-coil NO 12 A, 250 VAC, cos=1 85C 50x10 3 RT114 AC-coil NO 12 A, 250 VAC, cos=1 70C 100x10 UL 508 3 RT314 NO / NC 20 A, 250 VAC, general purpose 85C 6x10 3 RT334 NO 16 A, 250 VAC, general purpose 85C 50x10 3 RT314 NO 1 hp, 240 VAC 40C 1x10 EN60947-5-1 RT314 DC-coil NO / NC 2 A, 24 VDC DC13 6.050 EN60730-1 3 RT314 DC-coil NO 12(2) A, 250 VAC 85C 100x10 Coil data Rated coil voltage range DC coil 5...110 VDC AC coil 24...230 VAC Operative range to IEC 61810 2 Coil insulation system according UL1446 class F 1 Datasheet Rev. HK1 Dimensions are in mm unless Product specification processing information only in the Schrack section. Issued 2008/11 otherwise specified and are according to IEC 61810-1. to be used together with the www.tycoelectronics.com shown for reference purposes Product data, technical para- Definitions section in the cat- Specifications subject to www.schrackrelays.com only. meters, test conditions and alogue or at schrackrelays.com change.General Purpose Relays SCHRACK Power PCB Relay RT1 (Continued) Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 005 5 3.5 0.5 62+10% 403 006 6 4.2 0.6 90+10% 400 009 9 6.3 0.9 200+10% 400 012 12 8.4 1.2 360+10% 400 024 24 16.8 2.4 1440+10% 400 048 48 33.6 4.8 5520+10% 417 060 60 42.0 6.0 8570+12% 420 110 110 77.0 11.0 28800+12% 420 All figures are given for coil without preenergization, at ambient temperature +23C Other coil voltages on request Coil versions, AC-coil 50Hz Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power 50 Hz 50 Hz 50 Hz VAC VAC VAC Ohm VA 524 24 18.0 3.6 350+10% 0.76 615 115 86.3 17.3 8100+15% 0.76 620 120 90.0 18.0 8800+15% 0.75 700 200 150.0 30.0 24350+15% 0.76 730 230 172.5 34.5 32500+15% 0.74 All figures are given for coil without preenergization, at ambient temperature +23C Insulation Dielectric strength coil-contact circuit 5000 Vrms open contact circuit 1000 Vrms Clearance / creepage coil-contact circuit W 10 / 10 mm Material group of insulation parts IIIa Tracking index of relay base PTI 250 V Insulation to IEC 61810-1 Type of insulation coil-contact circuit reinforced open contact circuit micro disconnection Rated insulation voltage 250 V Pollution degree 12 A version 3 3 16 A version 3 2 Rated voltage system 240 V 230 / 400 V Overvoltage category III Other data 6 Mechanical endurance DC coil > 30 x 10 cycles 6 AC coil > 10 x 10 cycles Material RoHS - Directive 2002/95/EC compliant as per product date code 0413 Resistance to heat and fire, WG version according EN60335-1, par.30 Environment Ambient temperature range DC coil -40...+85C AC coil -40...+70C Vibration resistance (function), NO / NC cont. 20 / 5 g, 30 ... 500 Hz Shock resistance (destruction) 100 g Category of protection RTII - flux proof, RTIII - wash tight Processing Mounting pcb or on socket Mounting position any Mounting distance DC / AC coils W 0 / W 2.5 mm Resistance to soldering heat flux-proof version 270C / 10 s wash-tight version 260C / 5 s Relay weight 14 g Packaging unit 20 / 500 pcs Accessories For details see datasheet Accessories Power Relay RT 2 Datasheet Rev. HK1 Dimensions are in mm unless Product specification processing information only in the Schrack section. Issued 2008/11 otherwise specified and are according to IEC 61810-1. to be used together with the www.tycoelectronics.com shown for reference purposes Product data, technical para- Definitions section in the cat- Specifications subject to www.schrackrelays.com only. meters, test conditions and alogue or at schrackrelays.com change.