ACCUSTAR IP-66 4 to 20mA Loop Powered Clinometer SPECIFICATIONS o o 3 to 45 sensing ranges IP-66 rated 4 to 20mA and analog outputs Zero and span adjustable o o -25 to +60 C temp range Rugged die-cast housing The AccuStar IP-66 is a 4 to 20mA loop powered clinometer specifically designed for industrial and outdoor applications. Rated to IP-66, the rugged die-cast, powder coated aluminum housing provides protection in the most hostile environments. The heart of the system is a variable resistance-based tilt sensor with no moving parts. When rotated about its sensitive axis, this unique sensor provides an exceedingly linear variation in resistance, which is then electronically converted into 4 to 20mA and VDC analog outputs proportional to the angular position. The AccuStar IP-66 may be operated as either a 2-wire loop FEATURES powered angle transmitter, or a 4-wire analog output tilt sensor. Mounting features integrated into the die cast housing, make Ranges from 3o 45o installation onto any vertical surface easy. Rugged die-cast aluminum housing Dust and water tight to IP-66 Current or voltage output 3m (10 ft.) long jacketed cable APPLICATIONS Crane safety systems Machine tool angle positioning Barge leveling and load distribution Medical vehicle leveling / mobile CT & MRI Mining equipment Solar array tracking systems SENSOR SOLUTIONS /// AccuStar IP-66 Rev. 3 9/2015 Page 1 ACCUSTAR IP-66 4 to 20mA Loop Powered Clinometer PERFORMANCE SPECIFICATIONS ELECTRICAL o o Linear range 3 to 45 Input voltage (unregulated) +12 to +30VDC (+18VDC min. required for 4 to 20mA operation) Output* 4 to 20mA or +0.5 to +4.5VDC (see note) Zero (level) output 12mA or +2.5VDC Max loop resistance 500 at +24VDC Linearity o o Null to 10 0.1 o o 10 to 45 1% o Null repeatability 0.05 o Cross axis error <1% up to 45 Frequency response 0.5Hz -3db ENVIRONMENTAL/MECHANICAL o o Operating temperature range -25 to +60 C o o Temp. coefficient of null 0.05 / C o o o o Temp. coefficient of scale factor 3 & 5 models = 0.3% / C All Others = 0.1% / C Shielded cable with FEP jacket, four conductors, stranded 22 AWG, Cable 3m (10 foot) long min.. Notes: * Unit supplied with 4 to 20mA output calibrated. Use of the +0.5 to +4.5VDC output requires subsequent calibration All values are nominal unless otherwise noted DIMENSIONS AND WIRING Dimensions are in inches mm SENSOR SOLUTIONS /// AccuStar IP-66 Rev. 3 9/2015 Page 2