GA10K3435STM010 TE Connectivity

SINGLE INSULATED TPE OM PROBE 5 X 20MM SPECIFICATIONS TPE Overmolded Thermistor Probe for HVAC Applications Probe head dimensions of 5 x 20mm 24 AWG Zipcord cable IP-67 Rated Ideal from ambient air sensing in building management applications, heater controls, air conditioning Available in a variety of connector types RoHS Compliant FEATURES This thermistor assembly consists of a NTC thermistor soldered to a single insulated TPE extension cable. The sensor and the extension 24AWG Zipcord TPE cable cable are moulded together as one hot vulcanised unit to give a high IP-67 Rated degree of protection against water/moisture ingress. Insulation Resistance 100M 500VDC Available in a variety of connector types Customized tolerances and resistances available on request Temperature range -35C to +105C APPLICATIONS Building Management Applications Heater Control Air Conditioning TE CONNECTIVITY SENSORS /// MODEL NUMBER 10K3435STM010 03/2019 Page 1 SINGLE INSULATED TPE OM PROBE 5 X 20MM PERFORMANCE SPECS Parameters Value Units Nominal Resistance at +25C 10,000 Ohms Tolerance at +25C 1 % Beta Value 25/85 3435 K Tolerance on Beta Value 1 % Max power (probe in still air at +25C) 400 mW Time Constant. (63.2% Span) Approx. 15 Seconds Temperature range -35 to +105 C MECHANICAL DETAILS Dimension A B C D 5 1mm 35 3mm 5mm 20 1mm Note 1 NTC encapsulated using Black TPE over-mold material (Temp. Rating +125C) Note 2 24AWG (7/32) Tin plated Zipcord cable with Black TPE jacket (Temp. Rating +125C) Figure 1: TPE Overmoulded Probe 5 x 20mm TE CONNECTIVITY SENSORS /// MODEL NUMBER 10K3435STM010 03/2019 Page 2