ST63-3-55-20-90 TE Connectivity

SPECIFICATION CONTROL DRAWING Product Revision Product Dimensions Cable Dimensions Product Ident. L 1.75 A B D E F G Name Code min min max max min min (L 0.070) 16.50 1.90 2.65 1.90 2.65 0.90 0.50 ST63-1-00 B ST631R (0.650) (0.075) (0.105) (0.075) (0.105) (0.035) (0.020) 16.50 2.65 3.68 2.65 3.68 1.40 0.72 ST63-2-00 B ST632R (0.650) (0.105) (0.145) (0.105) (0.145) (0.055) (0.030) 16.50 4.30 5.08 4.30 5.08 2.15 1.25 ST63-3-00 B ST633R (0.650) (0.170) (0.200) (0.170) (0.200) (0.085) (0.050) 19.10 5.95 6.45 5.95 6.45 3.30 1.80 ST63-4-00 B ST634R (0.750) (0.235) (0.255) (0.235) (0.255) (0.130) (0.070) 19.10 7.00 7.60 7.00 7.60 4.30 2.50 ST63-5-00 B ST635R (0.750) (0.275) (0.300) (0.275) (0.300) (0.170) (0.100) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. APPLICATION 1. These parts are designed to provide an environment resistant shield terminations on cables, rated for 125C minimum, meeting the dimensional criteria listed, having tin or silver plated shields and insulation. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet requirements of Raychem Specification RT-1404. 3. Temperature range: -55C to +150C. 4. For best results, prepare the cable as shown: TITLE: SOLDERSLEEVE SHIELD 305 Constitution Drive, Menlo Park, CA. 94025, USA TERMINATOR DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. Inches dimensions are shown in brackets. ST63-X-00 TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to amend 0.00 N/A this drawing at any time. Users should PROD. REV.: DOC. ISSUE: DATE: 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for their SEE TABLE 6 6-Dec-02 0 N/A MICRON application. PREPARED BY: DCR NUMBER: REPLACES: SCALE: SIZE: SHEET: mforonda D020557 D981346 None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.