STA-300 Tektronix

16 Signal Conditioning 11/16/01 11:40 PM Page 387 Screw Terminal Accessory Boards CONN-3160-D1: Screw Terminal Panel. The CONN-3160-D1 Adapter Panel brings all KPCI-3160 STA-16: The STA-16 is the screw terminal accessory for digital I/O signals out to an external panel via 50- the DAS-1600/1400/1200 Series. It contains two 37-pin D- pin headers. This panel allows connection of the type male connectors. This allows a C1800 cable to be ADP-5037 to allow the KPCI-3160 to operate the used for connection to the data acquisition board and SRA-01 or ERA-01, ERB-24 or SSIO-244 relay prod- STA-1360: The STA-1360 is a single-channel back- the S1600 cable can be used to connect to an EXP-GP or ucts or to allow digital connections via the STP-50 plane for the MB-Series modules. It accepts one other accessory board. All signals from the data acquisi- or STA-50 Screw Terminal Panel and Accessory MB-Series module. All connections are brought tion board are brought out to labeled screw terminals. boards. Requires the CAB-1800 or CAB-1800/S out to screw terminals. It can be used in applica- The analog input channels are separated by analog cable. tions where only one signal conditioning module ground connections. A breadboard area is included for is needed or as a convenient adapter for test or DIN-KIT: Hardware for mounting STP-37/C, STP- custom circuitry. Plated through holes are also available evaluation purposes. Standoffs are included so the 37/FC or STP-50/C on a DIN rail. on each line for additional components. board can be easily located on any flat surface. STA-08: The STA-08 provides one 37-pin D-type Dimensions: 5.2L 6.7W 2.3H 3 Includes 4 standoffs. male connector for hook up to the DAS-800. All Dimensions: 4.3 2.9 (10.8cm 7.3cm) signals are routed to labeled screw terminal con- nections. The digital I/O lines are connected to 7 LEDs to indicate their status. A small breadboard area with power is provided. Dimensions: 5.2L 6.7W 2.3H STA-1800HC: The STA-1800HC is a dedicated STA-50: The STA-50 is a universal 50-pin screw ter- screw terminal accessory for the DAS-1800HC. All minal board. Two 50-pin male connectors and a I/O connections on the DAS-1800HC are brought user breadboard area are provided. The signals on out to labeled screw terminals. For ease of wiring the two connectors are tied together and brought differential inputs, each channel has an adjacent out to screw terminals. Requires a CACC-2000 ground connection. A CJC sensor with terminal cable. blocks is included to facilitate the measurement of Dimensions: 13.2cm 17.0cm 5.8cm thermocouples with the DAS-1801HC. Four 37-pin D-type male connectors are available for connect- STA-08PGA: The STA-08PGA provides one 37-pin D- ing external accessories. Up to 2 MB01 backplanes type male connector for hook up to the DAS-801 can be accommodated. A breadboard area with and DAS-802. All signals are routed to labeled screw power connections is available for custom circuitry. terminal connections. The digital I/O lines are con- Dimensions: 16.0 4.75 (40.6cm 12.1cm) nected to 7 LEDs to indicate their status. A small breadboard area with power is provided. Dimensions: 5.2L 6.7W 2.3H STA-300: Screw Terminal Accessory. Mounts on a panel and includes nylon standoffs for tabletop applications. Requires a CAB-305 cable. 1.888.KEITHLEY (U.S. only) www.keithley.com A GREA TER MEASURE OF CONFIDENCE SIGNAL CONDITIONING Connection accessories16 Signal Conditioning 11/16/01 11:40 PM Page 388 Screw Terminal Accessory Boards STA-3108-1 A3: Adapter panel that adapts the 36- pin connector (from the KPCI-3107/3108 analog I/O port) of the CAB-1284CC cable to four 24-pin STA-TC/B: The STA-TC/B is a dedicated screw ter- STA-1800U: The STA-1800U is a universal screw headers mounted on the STA-3108A3. Each of minal accessory for the DAS-TC/B. The STA-TC/B terminal accessory for the members of the DAS- these headers has jumpers that are used to select brings out all signals on the I/O connector of the 1800 Series which use a 50-pin I/O connector. All one of four KPCI-3107/3108 input channels. DAS-TC/B to labeled screw terminals. The screw I/O lines are brought out to labeled screw termi- terminals are mounted on an isothermal bar to nals with adjacent ground connections for the ana- insure that all connections are made at approxi- log input channels. A second 50-pin male header is mately the same temperature. A CJC sensor is available for daisy chaining expansion accessories. mounted inside the isothermal bar. Switch selec- Four 26-pin headers are included for attaching MB- table pull-up resistors for open thermocouple 02 signal conditioning backplanes. Channel selec- detection are included. tion jumpers are provided for each of the 4 con- STA-TEMP: Screw terminal accessory board. nectors. One 37-pin male D-type connector can attach to an MB-01 accessory.. STA-3108-1 D1: Adapter panel that adapts the 36- pin connector (from the KPCI-3107/3108 digital I/O port) of the CAB-1284CC cable to a 50-pin header (mounted on the STA-3108D1) with signals arranged for use with KPCI-PIO96 accessories. STA-3108 A1: Adapter panel that adapts the 36-pin STA-U: The STA-U is a universal screw terminal connector (from the KPCI-3107/3108 analog I/O accessory designed to connect to many Keithley port) using the CAB-1284CC cable to a 50-pin data acquisition boards. It includes one 25-pin header mounted on the STA-3108A1. female D-type connector and two 37-pin male D- type connectors tied together. All 37 lines are brought out to screw terminal connections. A small breadboard area is available for additional cir- cuitry. The STA-U is used for direct connection to STA-MB: The STA-MB Screw Terminal Accessory data acquisition boards or it can be used in con- provides sockets for 4 MB-Series modules. Two junction with an expansion accessory such as the parallel 37-pin D male connectors provide inter- EXP-GP to provide connection to the signals not faces for DAS boards and accessories. The MB- available on the expansion accessory. Series module inputs and outputs as well as the Dimensions: 5.2L 6.7W 2.3H I/O connector pins are brought out to screw termi- nals. You then wire the MB-Series outputs to pins STA-3108-1 A2: Adapter panel that adapts the 36- on the I/O connectors according to the re- pin connector (from the KPCI-3107/3108 analog quirements of your application. I/O port) using the CAB-1284CC cable to a 37-pin header mounted on the STA-3108A2. 1.888.KEITHLEY (U.S. only) www.keithley.com A GREA TER MEASURE OF CONFIDENCE SIGNAL CONDITIONING Connection accessories