Series CCR-33S/CR-33S
Miniature DC18 GHz/DC-22 GHz
COAX SWITCHES
Latching SPDT Coaxial Switch
PART NUMBER DESCRIPTION
CCR-33S Commercial Latching SPDT, DC-18GHz
CR-33S Elite Latching SPDT, DC-22GHz
Available with
The CCR-33S/CR-33S is a broadband, SPDT, electromechanical, coaxial switch designed to switch
USB & Ethernet
Control!
a microwave signal from a common input to either of two outputs. The characteristic impedance is 50
Ohms. The small switches incorporate SMA connectors.
The CCR-33S/CR-33S series switch is offered with a latching actuator. This design is compatible with
the two most common mounting hole patterns. The CCR-33S/CR-33S series switch is interchangeable
with a variety of switches.
ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS
Operating Temperature Form Factor SPDT,
Commercial Model, CCR-33S 25C to 65C break before make
Elite Model, CR-33S*** 55C to 85C
Frequency Range
Vibration (MIL-STD-202 Method 214, 10 gs RMS CCR-33S DC18 GHz
Condition D, non-operating) CR-33S DC22 GHz
Shock (MIL-STD-202 Method 213, 500 gs Characteristic Impedance 50 Ohms
Condition D, non-operating)
Operate Time 10 ms (max.)
Standard Actuator Life 5,000,000 cycles
Actuation Voltage Available 12 15 24 28 V
Actuator Life w/ Additional Features 1,000,000 cycles
Actuation Current, max. @ ambient 140 170 90 65 mA
Connector Type SMA
Humidity (Moisture Seal) Available
Weight 1.65 oz. (46.78g) (max.)
TYPICAL PERFORMANCE CHARACTERISTICS
Frequency DC3 GHz 36 GHz 612 GHz 1218 GHz 18-20 GHz 20-22 GHz
Insertion Loss, dB, max. 0.2 0.2 0.4 0.5 0.6 0.6
Isolation, dB, min. 70 70 60 60 50 50
VSWR , max. 1.25:1 1.25:1 1.4:1 1.5:1 1.6:1 1.6:1
For maximum limits, please see charts on page 3-5
PART NUMBERING SYSTEM
CCR-33 S 6 C - T **
Series Options
Connectors Actuator Type
Actuator Voltage
Connector Actuator Voltage Actuator Type Options
S: SMA Female 6: 28 Vdc Latching 0: Standard Contacts T: TTL Drivers with Diodes
7: 15 Vdc Latching C: Indicator Contacts*** D: Transient Suppression
8: 12 Vdc Latching D: Self Cutoff Only Diodes
9: 24 Vdc Latching E: Indicators and Self Cutoff*** R: Positive + Common
N: Narrow Body
**SEE PARTS LIST ON PAGES 8-9 M: Moisture Seal
S: 9 Pin D-Sub Connector
*** Indicator Contacts Operating Temperature
For other options, contact factory.
-50C to 85C (Elite Model Only)
2019 TELEDYNE RELAYS (800) 284-7007 www.teledynecoax.com CCR-33S/CR-33S Page 1
CCR-33S\CR-33S\022019\Q1Series CCR-33S/CR-33S
Miniature DC18 GHz/DC-22 GHz
COAX SWITCHES
Latching SPDT Coaxial Switch
SCHEMATICS AND MECHANICAL OUTLINE
Indicators TTL Analog
2X SOLDER TERMINALS 2X SOLDER TERMINALS
SOLDER WIRE MAXIMUM SOLDER WIRE MAXIMUM
TEMP 250C FOR NO TEMP 250C FOR NO
MORE THAN 5 SEC MORE THAN 5 SEC
Indicators TTL Analog
2X SOLDER TERMINALS 2X SOLDER TERMINALS
SOLDER WIRE MAXIMUM SOLDER WIRE MAXIMUM
TEMP 250C FOR NO TEMP 250C FOR NO
MORE THAN 5 SEC MORE THAN 5 SEC
(1.80 MAX with ttL)
(1.80 MAX with ttL)
H = 1.30 MAX. STD MODEL
H = 1.30 MAX. STD MODEL
H = 1.80 MAX. TTL MODEL
H = 1.80 MAX. TTL MODEL
H = 1.30 MAX. STD MODEL
H = 1.30 MAX. STD MODEL
H = 1.80 MAX. TTL MODEL
H = 1.80 MAX. TTL MODEL Optional Narrow Width Body
Standard Width Body
1
Optional Narrow Width Body
Standard Width Body
6
P/N 2706650
-s option 9-pin d -sub orconnect (example : ccr -33s 60-s )
9 PIN D-SUB PINOUT FOR LATCHING SPDT
TRUTH TABLE (with TTL option)
OPTIONS
Indicator
Logic Input RF Path
Pin Indicators &
(if applicable)
Basic Indicators TTL
No. TTL
1
1 2 IN IN A B
1 1 1
9
to 1 to 2
2 2 2
0 0 No Change
3 C C Common Common
P/N 2707572
1 0 On Off C 0
4 1 1
5 2 2
0 1 Off On 0 C
6 Vsw Vsw
1 1 Forbidden
7 A A
8 B B
1 5
6 10
9 C C
11 15
CCR-33S/CR-33S Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2019 TELEDYNE COAX SWITCHES
AMPHENOL P/N
P-17EHD-015P
CCR-33S\CR-33S\022019\Q1