Series CCR-38S/CR-38S Multi-Throw DC18 GHz/DC-22 GHz COAX SWITCHES Normally Open Coaxial Switch PART NUMBER DESCRIPTION CCR-38S Commercial Normally Open Multi-throw, DC-18GHz CR-38S Elite Normally Open Multi-throw, DC-22GHz Available with The CCR-38S/CR-38S is a broadband, multi-throw, electromechanical coaxial switch designed to switch USB & Ethernet Control a microwave signal from a common input to any of 3, 4, 5, or 6 outputs. The characteristic impedance is 50 Ohms. The switches are small using the popular connector spacing on a 1.062 dia. circle. Each position has an individual actuator mechanism allowing random position selection. This also gives the minimum switching time. Click here With the normally open actuator, all paths are open when the switch is de-energized. MMC SERIES ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Operating Temperature Form Factor Multi-Throw, Commercial Model, CCR-38S 40C to 65C break before make Elite Model, CR-38S 55C to 85C Frequency Range Vibration (MIL-STD-202 Method 214, 10 gs RMS CCR-38S DC18 GHz Condition D, non-operating) CR-38S DC-22 GHz Shock (MIL-STD-202 Method 213, 500 gs Characteristic Impedance 50 Ohms Condition D, non-operating) Operate Time 15 ms (max.) Standard Actuator Life 5,000,000 cycles Release Time 15 ms (max.) Actuator Life w/ Additional Features 1,000,000 cycles Actuation Voltage Available 12 15 24 28 V Connector Type SMA Actuation Current, max. ambient 400 205 170 140 mA Humidity (Moisture Seal) Available Weight 6 oz. (170.1g) (max.) TYPICALPERFORMANCE CHARACTERISTICS Frequency DC4 GHz 48 GHz 812 GHz 1216 GHz 16-20 GHz 20-22 GHz Insertion Loss, dB, typ. 0.1 0.2 0.2 0.3 0.3 0.4 Isolation, dB, typ. 80 80 80 80 75 70 VSWR , typ. 1.05:1 1.1:1 1.2:1 1.2:1 1.2:1 1.2:1 For maximum limits, please see charts on pages 7-9 PART NUMBERING SYSTEM ** CCR-38 S 1 6 C - T Series Options Connectors Actuator Type Actuator Voltage Number of Positions CONNECTOR ACTUATOR VOLTAGE NUMBER OF POSITIONS ACTUATOR TYPE OPTIONS S: SMA FEMALE 1: 28 VDC NORMALLY OPEN 3: SP3T 0: NO INDICATOR CONTACTS T: TTL DRIVERS WITH DIODES 2: 15 VDC NORMALLY OPEN 4: SP4TC: INDICATOR CONTACTS D: COIL TRANSIENT SUPPRESSION DIODES 3: 12 VDC NORMALLY OPEN 5: SP5T D: SELF CUTOFF ONLY S: D-SUB CONNECTOR* 4: 24 VDC NORMALLY OPEN 6: SP6TTD: DECODERS AND TTL DRIVERS WITH DIODES **SEE PARTS LIST ON PAGE 12-13 M: MOISTURE SEAL * D-Sub Connector may be 9 or 15 pin depending on For additional options, please contact factory. number of throws. (See Connector Pinout page) 2016 TELEDYNE RELAYS (800) 284-7007 www.teledynecoax.com CCR-38S/CR-38S Page 1 CCR-38S CR-38S 072016 Q2Series CCR-38S/CR-38S Multi-Throw DC18 GHz/DC-22 GHz COAX SWITCHES Normally Open Coaxial Switch SCHEMATICS AND MECHANICAL OUTLINE Analog Indicators TTL SP3T SP4T SP5T H = 1.75 STD & Indicator Model SP6T H = 2.00 D-Sub Model H = 2.25 Indicator with D-Sub Model H = 2.50 TTL, TTL with Indicators & TTL with D-Sub Model -S OPTION 9-PIN D-SUB OR 15-PIN D-MICRO CONNECTOR (EXAMPLE: CCR-38S160-S) CCR-38S/CR-38S Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2016 TELEDYNE COAX SWITCHES CCR-38S CR-38S 072016 Q2