DS22R1E Teledyne

Series DS6R3E 3A to 60 Vdc SIP Package DC Control Part Number Description DS6R3E 3A, 60 Vdc Part Number Explanation DS 6 R 3 E 4 2 Control Range Series Switch Type 1 Line Voltage Output Current Amps FEATURES/BENEFITS NOTES Industry standard package 1) Line Voltage (nominal) 6 = 60 Vdc 2) Switch Type: R = Random turn-on Surge tolerant 3) Control Range: E = 3-30 Vdc Compact size DESCRIPTION MECHANICAL SPECIFICATION The DS 3-amp solid-state single inline package (SIP) 0.01 .02 four-pin relays are designed for mounting on printed .39 (10.2) 1.70 (43.2) circuit boards. The relays are designed for medium power DC loads. The Series DS relay is an alternative to electromechanical and reed relays. 0.01 APPLICATIONS .98 (25.4) Programmable logic controllers + + 4 3 2 1 Instrumentation Test equipment .02 1 .19 (6.5) Solenoid drivers .30 (7.63) .001 .001 .40 .49 (10.16) (12.7) .30 (7.62) .001 .20 WEIGHT: 0.7 oz. (20g) TOLERANCES: 0.1 (5.08) TYPICAL APPLICATION Figure 1 DS relays dimensions in inches (mm) + 1 + BLOCK DIAGRAM 2 + 3 1 + ( ) * Load 2 4 ( ) On inductive loads * Figure 2 DS relays - Figure 3 DS relays 2014 TELEDYNE RELAYS (800) 284-7007 www.teledynerelays.com DS6R3E Page 1 DS6R3E 072014 Q3Series DS6R3E 3A to 60 Vdc SIP Package DC Control INPUT (CONTROL) SPECIFICATION LOAD CURRENT RERATING CURVES Min Max Units 5 Control Range 3 30 Vdc 4 Input voltage <10Vdc Input Current Range 1 30 mAdc 3 2 Must Turn-Off Voltage 1 Vdc Input voltage = 30Vdc 1 Input Resistance (Typical) 1000 Ohms 0 0 10 20 30 40 50 60 70 80 90 100 110 OUTPUT (LOAD) SPECIFICATION Ambient Temperature ( C) Min Max Units Operating Range 2 60 Vdc Peak Voltage 60 Vpeak ENVIRONMENTAL SPECIFICATION Load Current Range .005 3 A Min Max Units Operating Temperature -40 80 C Maximum Surge Current Rating (Non-Repetitive) 10 Apeak Storage Temperature -40 105 C On-State Voltage Drop 1.6 Vdc Input-Output Isolation 2500 Vrms Off-State Leakage Current 1 mA Input-Output Capacity 8 pF Turn-On Time 200 s NOTES 1) Electrical speci cations at 25C unless otherwise speci ed 2) On inductive loads, a free-wheeling diode (or clamp) is recommended Turn-Off Time 800 s 3) For additional/custom options, contact factory. Off-State dv/dt 200 V/s Switching Frequency 0 500 Hz DS6R3E Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2014 TELEDYNE RELAYS DS6R3E 072014 Q3 Load Current (A)