TM Digital Storage Scope Specification Table Bandwidth 60 MHz Rise Time 5.8 ns Sample Range 500 MS / s Vertical Sensitivity 2 mV to 5 V / div Maximum Record Length 1,024 k Sample Rate Real time 500 MS / s, Equivalent : 25 GS / s Scan Time Base 5 ns to 50 s / div Trigger Type Edge, Pulse, Video and Alternate Automatic Waveform Measurements 28 Standard : USB Device Ports USBHost : RS-232C Optional : LAN Mathematics Add, Subtract, Multiply, Divide, Reverse and FFT Applications College Education, R and D, Electronic Product Assemble Line, Industrial Control etc Display 64 k, Full Colour LCD 320 240 General Characteristics 100 - 240 V ac, 45 Hz - 440 Hz, CATII Power rms LCD Size Diagonal 145 mm (5.7 inches) Colour Red and Grey, White and Grey Size 320 mm (wide) 150 mm (high) 130 mm (deep) Probe 2 (1x, 10x Switchable Optional Purchase 100x probe), Power Cord and English Standard Accessories Manual Part Number Table Description Part Number Digital Storage Scope, 60 MHz, 2 CH 72-8230 Important Notice : This data sheet and its contents (theInformatio) belong to the members of the Premier Farnell group of companies (theGrou) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) TM is excluded. This will not operate to limit or restrict the Group s liability for death or personal injury resulting from its negligence. TENMA is the registered trademark of the Group. Premier Farnell plc 2012. www.element14.com TM www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page <1> 10/04/12 V1.1Power Supply Unit TM Bench Features: Complete digital control 10mV / 1mA resolution Low noise and ripple CV / CC constant voltage and constant current mode OCP and OVP settings, constant protection mode 5 sets of parameters can be stored and recalled Output switch control Power-off memory function Keyboard lock function Specification Table: Voltage Range 0 to 30V Current Range 0 to 3A Load Regulation Voltage : 0.01% +2mV Current : 0.1% +5mA Line Regulation Voltage : 0.01% +3mV Current : 0.1% +3mA Setup Resolution Voltage : 10mV Current : 1mA Setup Accuracy (25C 5C) Voltage : 0.5%+20mV Current : 0.5%+5mA Ripple (20Hz to 20MHz) Voltage : 1mVrms Current : 3mArms Temp. Coefficient Voltage : 100ppm +10mV Current : 100ppm +5mA Read Back Accuracy Voltage : 10mV Current : 1mA Read Back Temp. Coefficient Voltage : 100ppm +10mV Current : 100ppm +5mA Reaction Time (10% Rated load) Voltage : 100mS Current : 100mS Indoor use Altitude : 2,000m Operation Environment Ambient temp. : 0C to +40C Relative humidity : 80% User manual Accessories UK Power cord (1.2m) Euro Power cord (1.2m) Weight 3.5kg Dimension 110(W) 156(H) 260(D) Ambient temp. : 10C to +70C Storage Environment Relative humidity : 70% Part Number Table Description Part Number PSU, Bench, Single, 3A, 30V 72-10480 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. Premier Farnell plc 2012. TM www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page <1> 07/11/12 V1.0