TM 2 in 1 LAN Tester & Multi-meter Features: 2 in 1- LAN Tester & Multi-meter Measures DC/AC Voltage, DC/AC Current, Resistance, Continuity, diode and LAN tester 3-1/2 digit (2000 count) LCD display for multi-meter functions LED Displays the actual pin configuration of 10BASE-T and 10BASE-2 Thin Ethernet, FJ45 258A, tia-568a/568b and Token Ring cables Double Molded housing CATIII 600V CATII 1000V Provides easy to read continuity and fault status display Checks for continuity, open wire, ground wire, shorted pair and crossed pair faults Allows for remote testing of installed cables from wall jack or patch panel Auto or manual scanning for LAN tester Auto-ranging with auto power off for multi-meter functions Specifications: Max. Input Voltage 600V AC/DC Diode Test Test current 1mA max., open circuit voltage of 1.5V typical Continuity Check Audible signal if the resistance is <150 Display 2,000 count 3 1/2 digit LCD Over Range Indication LCD displays OL Polarity Minus (-) sign for negative polarity Low Battery Indication BAT symbol indicates low battery condition Input Impedance >7.5M (V DC & V AC) AC Response Average response ACV Bandwidth 50Hz to 60Hz Auto Power Off 15 minutes (approximately) Fuse mA, A ranges 0.2A/250V fast acting Fuse Batteries 9V battery and two AA batteries Operating Temperature 0 to 40C (32F to 104F) Storage Temperature -10C to 50C (14F to 122F) Weight 308g Size 162mm 74.5mm 44mm Standard IEC61010-1 CAT III-600V Pollution degree II, CE Approved Electrical Specifications: Function Range Accuracy 200mV, (0.5% rdg + 3d) DC Voltage 2V, 20V, (1% rdg + 3d) 200V, 600V (1% rdg + 3d) TM www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page <1> 29/06/15 V1.0TM 2 in 1 LAN Tester & Multi-meter Function Range Accuracy 2V, 20V, (1% rdg + 5d) AC Voltage 50-60Hz 200V, 600V (1.5% rdg + 10d) 200A, (1.5% rdg + 3d) 2,000A, DC Current 20mA, (2% rdg + 3d) 200mA, 200A, (1.8% rdg + 8d) 2,000A, AC Current 20mA, (2.5% rdg + 8d) 200mA, 200 (0.8% rdg + 5d) 2k, 20k, (1.2% rdg + 3d) Resistance 200k 2M (2% rdg + 5d) 20M (5% rdg + 8d) Part Number Table Description Part Number 2 in 1 LAN Tester & Multi-meter 72-8495 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. Premier Farnell plc 2012. TM www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page <2> 29/06/15 V1.0