TM Test Socket, 36A, Stud Designation 4mm Banana (female) Jack (socket) w/M4 Threaded Stud and Hex Nuts. Panel mounting, nut fixing. Applications Repairing and making of panels or boxes providing heavy duty and safety 4mm banana connections for power supplies, measurements, controls, tests etc. Characteristics Electrical Safety : The design of the socket front face meets the requirements of EN / IEC 61010-031: 2008 and the socket design is compatible with EN / IEC 61010-1:2010 for reinforced insulation at 1000V CAT II / 1000 V CAT III / 600 V CAT IV and 36A (at 40C). These specifications come from the creepage distances, clearances, solid insulation, and CTI of the socket. And the considered building and implementation specifications are: Insulat - ing panel pollution degree of the micro-environment, 1 or 2 relative humidity of the micro- environment, 80% maximum for temperatures up to 31C decreasing linearly to 50% relative humidity at 40C temperature range of the micro-environment, +5C to +40C indoor use and altitude, 2000m maximum. IP2X (touch-protected) protection on the front face according to EN / IEC 60529. Operating Temperature : -20C to +80C Materials : Conductors: Nickel-coated brass Colour : Black, Red, Blue, Green & Yellow Weight : 0.007 kg Diagram Dimensions : Millimetres TM www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page <1> 21/11/17 V1.0TM Test Socket, 36A, Stud Part Number Table Description Colour Part Number Test Socket, 36A, Stud Black 76-1656 Test Socket, 36A, Stud Red 76-1658 Test Socket, 36A, Stud Blue 76-1484 Test Socket, 36A, Stud Green 76-1486 Test Socket, 36A, Stud Yellow 76-1488 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. Premier Farnell Limited 2016. TM www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page <2> 21/11/17 V1.0