TL12W02-L(T30) Toshiba

TL12W02-L(T30) TOSHIBA LED lamps TL12W02-L(T30) Surface-mount devices Unit: mm 10.5 (L) mm 5.0 (W) mm 2.1 (H) mm High luminous flux: 60 lm(typ.) 250 mA Color: warm white 1 2 Polarity Topr / Tstg: 40 to 100C 10.5 0.2 8.0 Reflow-solderable 7.0 Standard embossed tape packing: T30 (500 / reel) 8-mm pitch, 24-mm tape reel Applications : general lighting LED Chip position Cathode index Color and Material 12 Part Number Color Material (1.0) TL12W02-L White (Warm white) InGaN 1.Anode Tolerance : 0.15 2.Cathode *This size is includes burr Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit JEDEC Forward Current I 300 mA F JEITA Power Dissipation P 2.37 W D TOSHIBA 4-5AY1 Operating Temperature T 40 to 100 C opr Weight: 0.30 g (typ.) Storage Temperature T 40 to 100 C stg Junction Temperature T 110 C j Note 1: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: The junction-to-ambient thermal resistance, Rth(j-a), should be kept below 25/W so that the TL12W02-L is not exposed to a condition beyond the absolute maximum ratings. Rth(j-a): Thermal resistance from the LED junction to ambient temperature I Ta F 350 300 250 200 150 100 50 Rth(j-a)=25/W 0 0 2040 6080 100 120 Ambient temperature Ta (C) 2009-01-19 1 Allowable forward current I (mA) F +0.4 *5.0 -0.2 1.2 2.0 0.5 (2.3) 3.0 2.1TL12W02-L(T30) Electrical Characteristics (Ta = 25C) Characteristics Symbol Test condition Min Typ. Max Unit Forward Voltage (Note 3) V I = 250 mA 6.3 6.8 7.9 V F F Reverse Current I V = 4 V 40 A R R Thermal Resistance (Note 4) Rth(j-s) I = 250 mA 10 C/W F Note 3: V rank classification F Ta=25C Forward Voltage V F Part Number Min Typ. Max I F TL12W02-L(T30) 6.3 6.8 7.9 250 1 6.3 7.2 2 7.0 7.9 Unit V mA The specification on the above table is used for V classification of LEDs in Toshiba facility. F Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned. Note 4: Rth(j-s): Thermal resistance from the LED junction to solder point. Optical Characteristics (Ta = 25C) Characteristics Symbol Test condition Min Typ. Max Unit C I = 250 mA (Note 5) x F Chromaticity C I =250 mA (Note 5) y F Luminous flux (Note 6) F I = 250 mA 28 60 113 lm F Note 5: The product is tested at the following chromaticity coordinate groups. Test conditions: I = 250 mA, Ta = 25C F Accuracy: 0.01 Cx Cy 0. 46 0.420 0.400 0.429 0.420 0. 44 L1 0.487 0.440 0.475 0.420 L1 0. 42 0.412 0.380 0.420 0.400 Black body L2 0. 40 L2 curve 0.475 0.420 0.460 0.395 0. 38 0. 36 0 . 38 0. 40 0. 42 0. 44 0 . 4 6 0 . 4 8 0 . 50 Cx 2009-01-19 2 Cy