TLP109 TOSHIBA Photocoupler GaAAs Ired & PhotoIC TLP109 Programmable Controllers Unit: mm Industrial Inverters 6 5 4 Switching Power Supplies The Toshiba TLP109 mini-flat coupler is a small-outline coupler suitable for surface-mount assembly. The TLP109 consists of a high-output-power GaAAs light emitting diode 1 3 optically coupled to a high-speed photodiode-transistor chip. +0.25 The TLP109 is housed in the SO6 package and guarantees a creepage 3.7 -0.15 7.0 0.4 distance of 5.0 mm, a clearance of 5.0 mm and an insulation thickness of 0.4 mm. Therefore, the TLP109 meets the reinforced insulation class requirements of international safety standards. 0.4 0.5 min 1.27 2.54 Isolation voltage: 3750 Vrms (min) Switching speed: t = 0.8 s, t = 0.8 s (max) pHL pLH TOSHIBA 11-4L1 R = 1.9 k L Weight: 0.08 g (typ.) TTL-compatible UL approved :UL1577, File No.E67349 c-UL approved :CSA Component Acceptance Service No. 5A, File No.E67349 Option (V4) VDE approved : DIN EN60747-5-2 Maximum Operating Insulation Voltage : 707 V PK Highest Permissible Over Voltage : 6000 V PK (Note) : When a EN60747-5-2 approved type is needed, Please designate Option(V4) Pin Configuration (Top View) Schematic I I F CC V 1 CC 1: ANODE 6 I O 3: CATHODE V O V F 4: EMITTER (GND) 5 5: COLLECTOR (OUTPUT) GND 6: V 3 CC 4 SHIELD Construction Mechanical Ratings Creepage distance: 5.0 mm (min) Clearance: 5.0 mm (min) Insulation thickness: 0.4 mm (min) Start of commercial production 2008/07 1 2014-09-01 +0.25 4.55 -0.15 0.1 2.1 0.1 0.15 TLP109 Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current (Note 1) I 20 mA F Pulse forward current (Note 2) I 40 mA FP Peak transient forward current (Note 3) I 1 A FPT Reverse voltage V 5 V R Power dissipation (Note 4) P 40 mW D Output current I 8 mA O Peak output current I 16 mA OP Supply voltage V 0.5 to 30 V CC Output voltage V 0.5 to 20 V O Output power dissipation (Note 5) P 100 mW O Operating temperature range T 55 to 125 opr C Storage temperature range T 55 to 125 stg C Lead solder temperature (10 s) T 260 C sol Isolation Voltage BV 3750 Vrms S (AC, 1 minute, R.H. 60%) (Note 6) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1) Derate 0.36 mA / C above 95C. (Note 2) 50% duty cycle, 1 ms pulse width. Derate 0.72 mA / C above 95C. (Note 3) Pulse width 1 s, 300 pps. (Note 4) Derate 0.72 mA / C above 95C. (Note 5) Derate 1.8 mW / C above 95C. (Note 6) Device considered a twoterminal device: Pins 1 and 3 shorted together, and pins 4, 5 and 6 shorted together. 2 2014-09-01 Detector LED