TLP160J TOSHIBA Photocoupler IRED & Photo-Triac TLP160J Triac Drive Unit: mm Programmable Controllers AC-Output Module Solid State Relay The TOSHIBA mini flat coupler TLP160J is a small outline coupler, suitable for surface mount assembly. The TLP160J consists of a photo triac, optically coupled to an infrared emitting diode. Peak off-state voltage: 600 V (min) Trigger LED current: 10 mA (max) On-state current: 70 mA (max) Isolation voltage: 2500 Vrms (min) UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5 (Note 1) TOSHIBA 11-4C3 Note 1: When a VDE approved type is needed, Weight: 0.09 g (typ.) please designate the Option(V4). Trigger LED Current Trigger LED Current (mA) Classification Marking of V =6V, Ta=25C T (Note 1) Classification Pin Configurations Min Max (top view) (IFT7) 7.0 T7 Standard 10 T7, blank Note 1:Ex.(IFT7) TLP160J (IFT7) 1 6 Note: Application type name for certification test, please use standard product type name, i.e. TLP160J(IFT7): TLP160J 4 3 1. Anode 3. Cathode 4. Triac Terminal 6. Triac Terminal Start of commercial production 1988-04 2019 1 2019-06-10 Toshiba Electronic Devices & Storage Corporation TLP160J Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta 53C) I / C -0.7 mA / C F Peak forward current (100 s pulse, 100 pps) I 1 A FP Reverse voltage V 5 V R P 100 mW Diode power dissipation D P /C -1.4 mW/C Diode power dissipation derating (Ta 53C) D Junction temperature T 125 C j Off-state output terminal voltage V 600 V DRM Ta=25C 70 On-state RMS current I mA T(RMS) Ta=70C 40 On-state current derating (Ta 25C) I / C -0.67 mA / C T Peak on-state current (100s pulse, 120pps) I 2 A TP Peak nonrepetitive surge current I 1.2 A TSM (P =10ms) W Output power dissipation P 200 mW O Output power dissipation derating (Ta 25C) P / C -2.0 mW / C O Junction temperature T 115 C j Storage temperature range T -55 to 125 C stg Operating temperature range T -40 to 100 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 60 s, R.H. 60 %) (Note 1) BV 2500 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc.). Note 1: Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage V 240 Vac AC Forward current I 15 20 25 mA F Peak on-state current I 1 A TP Operating temperature T -25 85 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-10 Toshiba Electronic Devices & Storage Corporation Detector LED