TLP161G TOSHIBA Photocoupler IRED & Photo Triac TLP161G Triac Drive Programmable Controllers Unit: mm ACOutput Module Solid State Relay The TOSHIBA mini flat coupler TLP161G is a small outline coupler, suitable for surface mount assembly. The TLP161G consists of a photo triac, optically coupled to an infrared emitting diode. Zero voltage crossing turn on Peak offstate voltage: 400 V (min) Trigger LED current: 10 mA (max) On state current: 70 mA (max) Isolation voltage: 2500 Vrms (min) UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5 (Note 1) Note 1 : When a VDE approved type is needed, TOSHIBA 11 4C3 please designate the Option(V4). Weight: 0.09 g (typ.) Trigger LED Current Trigger LED Current (mA) Marking of Classification* V =3V, Ta=25C T Classification Min Max (IFT5) 5 T5 (IFT7) 7 T5, T7 Standard 10 T5, T7, blank *Ex. (IFT5) TLP161G(IFT5) (Note) Application type name for certification test, please use standard product type name, i.e. TLP161G(IFT5): TLP161G Pin Configurations 1 6 3 4 ZC 1. ANODE 3. CATHODE 4. TERMINAL 1 6. TERMINAL 2 Start of commercial production 1988-04 2019 1 2019-06-10 Toshiba Electronic Devices & Storage Corporation TLP161G Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta 53C) I / C 0.7 mA / C F Peak forward current (100s pulse, 100pps) I 1 A FP Reverse voltage V 5 V R Diode power dissipation PD 100 mW P /C -1.4 mW/C Diode power dissipation derating (Ta 53C) D Junction temperature T 125 C j Offstate output terminal voltage V 400 V DRM Ta=25C 70 Onstate RMS current I mA T(RMS) Ta=70C 40 Onstate current derating (Ta 25C) I / C 0.67 mA / C T Peak onstate current (100s pulse, 120pps) I 2 A TP Peak nonrepetitive surge current I 1.2 A TSM (P =10ms) W Output power dissipation P 200 mW O Output power dissipation derating (Ta 25C) P / C 2.0 mW / C O Junction temperature T 115 C j Storage temperature range T 55 to 125 C stg Operating temperature range T 40 to 100 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 60 s, R.H. 60 %) (Note) BV 2500 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc.). (Note) Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage V 120 Vac AC Forward current I 15 20 25 mA F Peak onstate current I 1 A TP Operating temperature T 25 85 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-10 Toshiba Electronic Devices & Storage Corporation Detector LED