TLP2451A(TP,F) Toshiba

TLP2451A Photocouplers GaAAs Infrared LED & Photo IC TLP2451ATLP2451ATLP2451ATLP2451A 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Industrial Inverters MOSFET Gate Drivers IGBT Gate Drivers Induction Cooktop and Home Appliances 2. 2. 2. 2. GeneralGeneralGeneralGeneral The TLP2451A is a photocoupler in a SO8 package that consists of a GaAAs infrared light-emitting diode (LED) optically coupled to an integrated high-gain, high-speed photodetector IC chip. It provides guaranteed performance and specifications at temperatures up to 125. The TLP2451A has an internal Faraday shield that provides a guaranteed Common-mode transient immunity of 20 kV/ s. It has a totem-pole output that can both sink and source current. The TLP2451A is ideal for IBGT and power MOSFET gate drive. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Output peak current: 0.6 A (max) (2) Operating temperature: -40 to 125 (3) Supply current: 2 mA (max) (4) Supply voltage: 10 to 30 V (5) Threshold input current: 5 mA (max) (6) Propagation delay time: 500 ns (max) (7) Common-mode transient immunity: 20 kV/s (min) (8) Isolation voltage: 3750 Vrms (min) (9) Safety standards UL-approved: UL1577, File No.E67349 cUL-approved: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN60747-5-5 (Note 1)(Note 1)(Note 1) Option (V4) Note 1: When an EN60747-5-5 approved type is needed, please designate the Option (V4)Option (V4)Option (V4). Start of commercial production 2011-09 2016 Toshiba Corporation 2016-02-10 1 Rev.2.0TLP2451A 4. 4. 4. 4. Packaging and Pin ConfigurationPackaging and Pin ConfigurationPackaging and Pin ConfigurationPackaging and Pin Configuration 1: N.C 2: Anode 3: Cathode 4: N.C 5: GND 6: Output 7: N.C 8: V CC 11-5K1S 5. 5. 5. 5. Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note) Note: A 0.1F bypass capacitor must be connected between pin 8 and pin 5. 6. Principle of Operation 6. 6. 6. Principle of OperationPrinciple of OperationPrinciple of Operation 6.1. 6.1. 6.1. 6.1. Truth TableTruth TableTruth TableTruth Table Input LED M1 M2 Output H ON ON OFF H L OFF OFF ON L 6.2. Mechanical Parameters 6.2. 6.2. 6.2. Mechanical ParametersMechanical ParametersMechanical Parameters Characteristics Min Unit Creepage distances 4.2 mm Clearance distances 4.2 Internal isolation thickness 2016 Toshiba Corporation 2016-02-10 2 Rev.2.0