TLP3106 Photocouplers Photorelay TLP3106TLP3106TLP3106TLP3106 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Mechanical relay replacements Security Systems Measuring Instruments Factory Automation (FA) Amusement Equipment 2. 2. 2. 2. GeneralGeneralGeneralGeneral The TLP3106 photorelay consists of a photo MOSFET optically coupled to an infrared LED. It is housed in a 2.54SOP6 package. The low ON-state resistance and the high permissible ON-state current of the TLP3106 make it suitable for power line control applications. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Normally opened (1-Form-A) (2) OFF-state output terminal voltage: 30 V (min) (3) Trigger LED current: 3 mA (max) (4) ON-state current: 4.0 A (max) (A connection) (5) ON-state resistance: 40 m (max) (A connection) (6) Isolation voltage: 1500 Vrms (min) (7) Safety standards UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 4. 4. 4. 4. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 1: Anode 2: Cathode 3: N.C. 4: Drain 5: Source 6: Drain 11-7C1S Start of commercial production 2015-05 2017-2020 2020-02-17 1 Toshiba Electronic Devices & Storage Corporation Rev.4.0TLP3106 5. 5. 5. 5. Internal CircuitInternal CircuitInternal CircuitInternal Circuit 6. 6. 6. 6. Absolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, T = 25 = 25 = 25 = 25 )))) aaaa Characteristics Symbol Note Rating Unit LED Input forward current I 30 mA F Input forward current derating (T 25 ) I /T -0.3 mA/ a F a Input forward current (pulsed) (100 s pulse, 100 pps) I 1 A FP Input reverse voltage V 5 V R Input power dissipation P 50 mW D Input power dissipation derating (T 25 ) P /T -0.5 mW/ a D a Junction temperature T 125 j Detector OFF-state output terminal voltage V 30 V OFF ON-state current (A connection) I (Note 1) 4.0 A ON ON-state current (B connection) I (Note 1) 4.0 ON ON-state current (C connection) I (Note 1) 8.0 A ON ON-state current derating (A connection) (T 25 ) I /T (Note 1) -40 mA/ a ON a ON-state current derating (B connection) (T 25 ) I /T (Note 1) -40 a ON a ON-state current derating (C connection) (T 25 ) I /T (Note 1) -80 mA/ a ON a ON-state current (pulsed) (t = 100 ms, Duty = 1/10) I 12 A ONP Output power dissipation P 400 mW O Output power dissipation derating (T 25 ) P /T -4.0 mW/ a O a Junction temperature T 125 j Common Storage temperature T -55 to 125 stg Operating temperature T -40 to 85 opr Lead soldering temperature (10 s) T 260 sol Isolation voltage AC, 60 s, R.H. 60 % BV (Note 2) 1500 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook Handling PrecautionDerating Concept and Method) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: For an application circuit example, see Chapter 12.2. Note 2: This device is considered as a two-terminal device: Pins 1, 2 and 3 are shorted together, and pins 4, 5 and 6 are shorted together. 2017-2020 2020-02-17 2 Toshiba Electronic Devices & Storage Corporation Rev.4.0