TLP3119 TOSHIBA PHOTOCOUPLER PHOTO RELAY TLP3119 Measurement Instruments Unit: mm The TOSHIBA TLP3119 mini-flat photorelay is a small-outline photorelay, suitable for surface-mount assembly. The TLP3119 consists of an infrared- emitting diode optically coupled to a photo-MOSFET and is housed in a 4- pin package. Features 4-pin SOP (2.54SOP4): 2.1 mm high, 2.54 mm pitch 1-Form-A Peak Off-State Voltage: 80 V (min) Trigger LED Current: 3 mA (max) On-State Current: 200 mA (max) On-State Resistance: 8 (max) Output Capacitance: 11 pF (max) Isolation Voltage: 1500 Vrms (min) JEDEC UL-recognized: UL 1577, File No.E67349 JEITA cUL-recognized: CSA Component Acceptance Service No.5A TOSHIBA 11 5H1 File No.E67349 Weight: 0.1 g (typ.) VDE-approved: EN 60747-5-5 (Note 1) Note 1: When a VDE approved type is needed, please designate the Option(V4). Pin Configuration (Top View) Schematic 1 4 1 4 2 3 2 3 1 : ANODE 2 : CATHODE 3 : DRAIN 4 : DRAIN Start of commercial production 2004-10 2019 1 2019-06-17 Toshiba Electronic Devices & Storage Corporation TLP3119 Absolute Maximum Ratings (Ta = 25C) CHARACTERISTIC SYMBOL RATING UNIT Forward Current I 50 mA F Forward Current Derating (Ta 25C) I /C -0.5 mA/C F Reverse Voltage V 5 V R Diode Power Dissipation P 50 mW D Diode Power Dissipation Derating (Ta 25C) PD /C -0.5 mW/C Junction Temperature T 125 C j Off-State Output Terminal Voltage V 80 V OFF On-State Current I 200 mA ON On-State Current Derating (Ta 25C) I /C -2.0 mA/C ON Output Power Dissipation P 320 mW O Output Power Dissipation Derating (Ta 25C) P / C -3.2 mW / C O Junction Temperature T 125 C j Storage Temperature Range T -40 to 125 C stg Operating Temperature Range T -20 to 85 C opr Lead Soldering Temperature (10 s) T 260 C sol Isolation Voltage (AC, 60 s, R.H. 60 %) (Note 1) BV 1500 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two-terminal device: Pins 1 and 2 shorted together, and pins 3 and 4 shorted together. Caution This device is sensitive to electrostatic discharge. When using this device, please ensure that all tools and equipment are earthed. Recommended Operating Conditions CHARACTERISTIC SYMBOL MIN TYP. MAX UNIT Supply Voltage V 64 V DD Forward Current I 5 30 mA F On-State Current I 200 mA ON Operating Temperature T 25 60 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-17 Toshiba Electronic Devices & Storage Corporation DETECTOR LED