TODX2355(F) FIBER OPTIC TRANSCEIVING MODULE TODX2355(F) GENERAL PURPOSE FIBER OPTIC TRANSCEIVING MODULE For JIS F07(PN) type fiber optic connector 650 nm LED Low current LED drive (IF = 4 mA) ATC (Automatic Threshold Control) circuit built-in Low current consumption 1.5 mA (MAX) (Active) 70 A (MAX) (Standby). 1. Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Storage Temperature T 40 to 95 C stg Operating Temperature T 40 to 85 C opr Forward Current (DC) I DC 30 mA F Reverse Voltage V 5 V R Supply Voltage V -0.5 to 6 V CC High Level Output Current I -5 mA OH Low Level Output Current I 5 mA OL Soldering Temperature T 260 (Note 1) C sol Note 1: Soldering time 10 s (More than 1 mm apart from the package). Using continuously heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/ current/ voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handboo k(Handling Precautions/ Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 2. Operating Ranges Characteristics Symbol Min Typ. Max Unit Forward Current (DC) I - 4 8 mA F Supply Voltage V 4.75 5.0 5.25 V CC Data Rate DC - 10 Mb/s High Level Output Current I - - -0.4 mA OH Low Level Output Current I - - 0.4 mA OL Start of commercial production 2015-05 1 2018-08-02 TODX2355(F) 3. Electrical and Optical Characteristics (Ta = 25C, VCC = 5 V) Characteristics Symbol Test Condition Min Typ. Max Unit Data Rate (Note 2) NRZ Code DC 10 Mb / s - Transmission Distance (Note 2) APF (Note 3), Using TODX2355(F) 0.2 10 m - Pulse Width Distortion (Note 4) tw -30 30 % - Fiber Output Power (Note 5) P I = 4 mA, Using APF (Note3), -8 -4 dBm f F - Center Emission Wavelength c 650 - nm - Forward Voltage V I = 4 mA - 1.9 2.1 V F F Reverse Current I V = 5 V - 10 A R R - Maximum Receivable Power (Note 6) P APF (Note 3), DC to 10 Mb/s dBm MAX 0 - - Minimum Receivable Power (Note 6) P APF (Note 3), DC to 10 Mb/s - -19 dBm MIN - Active I (1) V = 5.25 V, C = 10 pF 0.6 1.5 mA CC CC L - (Optical flux on) Current Consumption Standby I (2) V = 5.25 V, C = 10 pF 50 70 A CC CC L - (No optical flux on) High Level Output Voltage V V = 4.75 V, I = -0.4 mA 4.6 - V OH CC OH 4.2 Low Level Output Voltage V V = 4.75 V, I = 0.4 mA 0.1 0.4 V OL CC OL - Note 2: Use the drive circuit of chapter number 4. High level output when optical flux is received. Low level output when it is not received. Note 3: All Plastic Fiber (980 m core / 1000 m cladding, NA = 0.5). Polished surface. Note 4: Between input of driver circuit of TODX2355(F) and output of TODX2355(F). Use the drive circuit of chapter number 4. Note 5: Measure with a standard optical fiber with fiber optic connectors. Valued by peak. -9 Note.6: BER 10 , Valued by peak. 4. Application Circuit (Bottom View) 2 2018-08-02