TORX1952(6M,F) Toshiba

TORX1951A(F) FIBER OPTIC RECEIVING MODULE TORX1951A(F) GENERAL-PURPOSE OPTICAL RECEIVING MODULE For JIS F05 type optical connector CMOS level interface +5V single power supply ATC (Automatic Threshold Control) circuit built-in. 1. Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Storage Temperature T 40 to 95 C stg Operating Temperature T 40 to 85 C opr Supply Voltage V 0.5 to 6 V CC High Level Output Current I 20 mA OH Low Level Output Current I 20 mA OL Soldering Temperature T 260 (Note 1) C sol Note 1: Soldering time 10 s (More than 1 mm apart from the package). Using continuously heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handboo k(Handling Precautions/ Derating Concept and Methods) and individual reliability data (i.e.r eliability test report and estimated failure rate, etc). 2. Operating Ranges Characteristics Symbol Min Typ. Max Unit Supply Voltage V 4.75 5.0 5.25 V CC High Level Output Current I 2.0 mA OH Low Level Output Current I 2.0 mA OL Start of commercial production 2016-01 1 2016-04-18 TORX1951A(F) 3. Electrical and Optical Characteristics (Ta = 25C, VCC = 5 V) Characteristics Symbol Test Condition Min Typ. Max Unit Data Rate - NRZ Code (N o te 2 ) DC - 6 Mb/s Using APF (Note 3) and TOTX1951A(F) Transmission Distance - 0.2 - 40 m DC to 6 Mb/s Using APF (Note 3) and TOTX1951A(F) Pulse Width Distortion (N ote 4) tw 55 - 55 ns Pulse width 165 ns Pulse cycle 330 ns, C = 10 pF L Using APF (Note 3) and TOTX1951A(F) Maximum Receivable Power (Note 5) P 9 - - dBm MAX DC to 6 Mb/s Using APF (Note 3) and TOTX1951A(F) Minimum Receivable Power (Note 5) P - - 27 dBm MIN DC to 6 Mb/s Current Consumption I - - 9 20 mA CC High Level Output Voltage V V = 4.75V 4.1 4.5 - V OH CC Low Level Output Voltage V V = 4.75V - 0.1 0.4 V OL CC Note 2: High level output when optical flux is received. Low level output when it is not received. The duty factor must be kept 25 to 75%. Note 3: All Plastic Fiber (980 m core / 1000 m cladding, NA=0.5) with polished surface. Note 4: Between input of TOTX1951A(F) and output of TORX1951A(F). 9 Note 5: BER 10 , Valued by peak. 4. Application Circuit 5. Applicable Optical Fiber with Fiber Optic Connectors All Plastic Fiber (980 m core / 1000 m cladding ), NA=0.5 F05 type optical connector with polished surface 2 2016-04-18