TEN 15-2413 TRACO Power

DC/DC Converters TEN 15 Series, 15 Watt Features Wide 2:1 input range High efcfi iency up to 88% Extended operating temperature range 40C to +85C Indenfi ite short circuit protection I/O isolation 1500 VDC Input filter to meet EN 55022, Class A and FCC, level A without external components Industry standard footprint Shielded metal case with insulated baseplate 3-year product warranty The TEN 15 series is a family of high performance 15W DC/DC converters in a compact 2 x 1 low prole pfi ackage with industry standard footprint. A high efcfi i - ency allows a wide operating temperature range of 40C to +85C. A built-in EMI lfi ter is built in to meet EN 55022, class A without any external components. Further standard features include over voltage protection and short-circuit protec- tion. Typical applications for these converters are battery operated equipment, in- strumentation, distributed power architectures in communication and industrial elec- tronics, everywhere where isolated, tightly regulated voltages are required. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 15-1210 3.3 VDC 4000 mA 79 % TEN 15-1211 5 VDC 3000 mA 82 % 12 VDC 1250 mA 86 % TEN 15-1212 9 18 VDC TEN 15-1213 15 VDC 1000 mA 86 % (12 VDC nominal) TEN 15-1221 5 VDC 1500 mA 83 % TEN 15-1222 12 VDC 625 mA 86 % TEN 15-1223 15 VDC 500 mA 84 % TEN 15-2410 3.3 VDC 4000 mA 80 % TEN 15-2411 5 VDC 3000 mA 84 % TEN 15-2412 12 VDC 1250 mA 85 % 18 36 VDC TEN 15-2413 15 VDC 1000 mA 85 % (24 VDC nominal) TEN 15-2421 5 VDC 1500 mA 84 % TEN 15-2422 12 VDC 625 mA 86 % TEN 15-2423 15 VDC 500 mA 86 % TEN 15-4810 3.3 VDC 4000 mA 81 % TEN 15-4811 5 VDC 3000 mA 83 % TEN 15-4812 12 VDC 1250 mA 87 % 36 75 VDC TEN 15-4813 15 VDC 1000 mA 86 % (48 VDC nomial) TEN 15-4821 5 VDC 1500 mA 85 % TEN 15-4822 12 VDC 625 mA 88 % TEN 15-4823 15 VDC 500 mA 87 % Page 1 of 4 DC/DC Converters TEN 15 Series 15 Watt Input Specifications Input current at no load 12 Vin models: 30 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 15 mA typ. Input current at full load 12 Vin 3.3 VDC models: 1470 mA typ. 12 Vin other models: 1550 mA typ. 24 Vin 3.3 VDC models: 730 mA typ. 24 Vin other models: 780 mA typ. 48 Vin 3.3 VDC models: 360 mA typ. 48 Vin other models: 380 mA typ. Surge voltage 12 Vin models: 36 V max. (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy 1 % Regulation Input variation Vin min. to Vin max. 0.5 % max. Load variation 2 % 100 % single output models: 0.5 % max. dual output models: 1 % max. (balanced load) 5 % max. (load cross variation 25 % / 100 %) Minimum load 2 % of rated max. output current. (Operation at lower load is safe but major deviations to specifyed data may occur) Ripple and noise (20 MHz Bandwidth) single output models: 50 mVpk-pk max. dual output models: 75 mVpk-pk max. Temperature coefficient 0.02 %/K Start up time (nominal Vin and constant resistive load) 20 ms typ. Transient response (25 % load step change) 250 s typ. Short circuit protection continiuous (automatic recovery) Over load protection 150 % of Iout max typ. foldback Over voltage protection 3.3 VDC models: 3.9 V 5.0 VDC models: 6.2 V 12 VDC models: 15 V 15 VDC models: 18 V Capacitive load 3.3 VDC models: 10200 F max. 5 VDC models: 7050 F max. 12 VDC models: 1035 F max. 15 VDC models: 750 F max. 5 VDC models: 1020 F max. 12 VDC models: 495 F max. 15 VDC models: 165 F max. All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.