Highlights SmartPro 120V 1kVA 750W Medical-Grade Line- Supports a half load up to 28 Interactive Tower UPS, 4 Outlets, Full Isolation, minutes full load up to 10 Expandable Runtime minutes MODEL NUMBER: SMART1200XLHG Four hospital grade outlets and hospital grade plug 650 joule surge suppression rating protects connected equipment Alarm mute/alarm quiet control is ideal for use around patients Package Includes SMART1200XLHG 1kVA/750W Medical-Grade Tower UPS System USB monitoring cable, 6 ft. DB9 serial monitoring cable, 6 ft. Description Tripp Lites SMART1200XLHG medical-grade UPS system provides dependable battery backup and is PowerAlert Software fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for Owners Manual use in patient-care vicinities. The 1kVA/750W capacity provides up to 28 minutes of runtime for a half load, or 10 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to normal 120V nominal output, without drawing battery power. The SMART1200XLHGs built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. This UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA 5-15P-HG plug with a 6 ft. cord for flexibility in placement. All four outlets provide both backup protection and surge protection, rated to 650 joules. The SMART1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lites included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure. Features Provides Ideal UPS Backup in Healthcare Facilities Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital- grade outlet 1 / 6 Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise Hospital-grade plug with 6 ft. cord provides flexibility in placement so healthcare workers can focus on treating the patient Battery Backup and Full Surge Protection 28 minutes runtime for half load (375W) 10 minutes for full load (750W) All four hospital-grade outlets provide surge protection rated to 650 joules EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference Resistant to electrostatic discharge LEDs and Audible Alarms Keep You Aware of Power Status Indicator lights on the front of the unit show you when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning Audible alarms alert you to power failure, overload and low battery conditions the alarms mute/quiet mode ensures patients are not disturbed Saves Your Files, Even When Youre Away Works with Tripp Lite PowerAlert software (included) to enable safe, unattended system shutdown and files saves during prolonged power failures Connects to your computer via either the DB9 port or USB port Specifications MODEL TEXT Key Benefit Provides UL 60601-1 compliant, medical-grade 1kVA/750W power backup, ideal for use in patient-care vicinities. The built-in isolation transformer offers full isolation while maintaining AC surge protection in all modes. OUTPUT Output Volt Amp Capacity (VA) 1000 Output kVA Capacity (kVA) 1 Output Watt Capacity (Watts) 750 Power Factor 0.8 Nominal Output Voltage(s) 115V 120V Supported Frequency Compatibility 60 Hz Output Voltage Regulation (Line -18%, +8% Mode) 2 / 6