Highlights SmartPro 120V 1.5kVA 1.35kW Line-Interactive Corrects under- and Sine Wave UPS, 2U, Network Card Options, LCD, overvoltages from 83V to 147V USB, DB9, 8 Outlets 8 NEMA 5-15R outlets4 MODEL NUMBER: SMART1500RM2U switchable via network interface Network power management and control capability Interactive LCD monitoring screen 13 min. runtime at half load 4.5 min. at full load To use the Auto Probe feature, this product requires a WEBCARDLX network interface (sold separately) running LX firmware update 15.5.2 or later Package Includes Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts, brownouts, power surges and line noise. Ideal solution for data centers, VoIP systems and network SMART1500RM2U SmartPro closets. 120V 1.5kVA 1.35kW Line- Interactive Sine Wave UPS Features USB cable Protects Mission-Critical Rack-Mounted Equipment DB9 cable Provides fully regulated sine wave AC output for servers, network storage devices and telecom EPO cable hardware Mounting hardware Audible alarm signals loss of utility power, overload, low battery and fault conditions Owners manual 8 NEMA 5-15R outlets 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input 0.9 power factor rating 570-joule surge suppression rating Reliable Battery Backup Supports half load up to 13 min. and full load up to 4.5 min. Internal batteries designed for hot-swap field replacement 95% line-power efficiency rating saves money in energy costs 2 Load Banks with Switchable Outlets Can control 4 outlets remotely to reboot equipment or shed nonessential loads Automatic Voltage Regulation (AVR) Maintains 120V nominal output over input range of 83V-147V without using battery power 1 / 6 EMI/RFI Line Noise Filtering Removes electromagnetic and radio frequency interference that can disrupt or damage equipment s performance Interactive LCD Screen Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes Rotates for easy viewing in rack-mount or tower configurations Network Management Cards Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD Communications Ports USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite s PowerAlert software, available via FREE download from www.tripplite.com/poweralert EPO port supports emergency shutdown in large facilities Versatile Installation Options Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory Mounts in upright tower position with optional 2-9USTAND accessory Specifications OVERVIEW UPC Code 037332119209 UPS Type Line-Interactive INPUT Rated input current (Maximum Load) 12A Nominal Input Voltage(s) Supported 120V AC UPS Input Connection Type 5-15P Input Circuit Breakers 15A UPS Input Cord Length (ft.) 10 UPS Input Cord Length (m) 3.1 Recommended Electrical Service 15A 120V Input Phase Single-Phase 2 / 6