HA78D-L128100MLFTR TT Electronics

Magnetics Shielded Surface Inductors Mount Coupled Model HA78D-L128XXXLFTR Features and Benefits Operating Temperature Range -50C to +155C Temperature Rise, Maximum 40C AEC-Q200 CERTIFIED RoHS Compliant Specifications 25C (2) (3) Inductance Inductance Heating Current Isat (1) Leakage DC Resistance 100kHz 100kHz Saturation Inductance Both One 0.1V 0.1V Current Part Number 100kHz 0.1V Winding Winding (Parallel) (Series) Parallel Series 0Adc 0Adc H TYP Amps Amps Amps m Max m Max H 20% H 25% 2.75 2.56 3.62 10.66 HA78D-L128100MLFTR 10.0 40.0 29.0 116.0 1.99 2.81 7.26 HA78D-L128220MLFTR 22.0 88.0 5.85 48.0 192.0 10.1 1.59 2.25 6.52 HA78D-L128330MLFTR 33.0 132.0 75.0 300.0 14.5 1.45 2.05 4.60 HA78D-L128470MLFTR 47.0 188.0 90.0 360.0 Notes: (1) Leakage inductance is for L1 and is measured with L2 shorted. (2) The Heating Current is the DC current which causes the component temperature to increase by approximately 40C from 25C ambient. This current is determined by soldering the component on a typical application PCB, and then applying the current to the component for 30 minutes. Heating current in both winding is under series configuration. (3) Isat is the saturation current at which inductance rolls off approximately 30% from its initial unbiased inductance value. It is sum of current flowing on both winding (parallel configuration). (4) PC Board layout, proximity of other components, trace size and airflow will affect temperature rise and must be considered when selecting an inductor. Derating Curve Electrical Schematic General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics own data and is considered accurate at time of going to print. www.ttelectronicsmagnetics.com TT Electronics plc Rev. 01 Mechanical Outline Dimensions (mm) Packing / Ordering Information Embossed Tape and Reel Standard : Reel : Diameter : = 13 (330.2mm) Capacity : Case Size 128 = 500 Units HA78D L 128 220 M LF TR Case Size: Inductance Tolerance Tape & Reel 128 K = 10% Packing Model Series M = 20% Lead-Free Inductance Code: High leakage First 2 digits are significant. Last digit denotes the number version of trailing zeros. For values below 10H, R denotes the decimal point. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics own data and is considered accurate at time of going to print. www.ttelectronicsmagnetics.com TT Electronics plc Rev. 01