Hermetic Infrared Emitting Diode OP130 Series Features: TO-46 hermetically sealed package Focused and non-focused optical light pattern W Enhanced temperature range Mechanically and spectrally matched to other OPTEK devices Choice of power ranges Choice of narrow or wide irradiance pattern Description: Each OP130 series device is a 935 nm gallium arsenide (GaAs) infrared LED mounted in a hermetically sealed TO -46 package that provides an enhanced temperature range with a variety of power ranges The TO-46 housing also offers high power dissipation and superior protection for hostile environments. Each OP130 device has a narrow beam with an inclusive angle at half power points of 18. Each OP130W series device has a broad irradiance pattern of 50 at half power points, providing relatively even illumination over a large area. These devices are designed to efficiently operate with OP800, OP593, OP598 and OP599 phototransistors or the OP830 photodarlington. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: Ordering Information Non-contact reflective object sensor Output Power Lead Part LED Peak Lens Total Beam 2 Assembly line automation (mW/cm ) Length Number Wavelength Type Angle Min / Max (Min) Machine automation Machine safety OP130 1.0 / NA End of travel sensor OP131 3.0 / NA Dome 18 Door sensor OP132 4.0 / NA OP133 5.0 / NA 935 nm 0.50 OP130W 1.0 / NA OP131W 3.0 / NA Flat 50 OP132W 4.0 / NA OP133W 5.0 / NA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue B 10/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 4 Hermetic Infrared Emitting Diode OP130 Series OP130, OP131, OP132, OP133 Anode Cathode MILLIMETERS DIMENSIONS ARE IN: INCHES OP130W, OP131W, OP132W, OP133W Anode Cathode MILLIMETERS Pin LED DIMENSIONS ARE IN: INCHES 1 Anode 2 Cathode OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 10/2012 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 4 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com