Plastic Infrared Emitting Diode OP265, OP266 Series (A, B, C, D, W) Features: T-1 (3 mm) package style Choice of narrow or wide irradiance pattern Choice of dome or flat lens Mechanically and spectrally matched to other OPTEK devices Higher power output than GaAs at equivalent drive currents 890 nm diodes Description: Each device in the OP265 and OP266 series is a high intensity gallium arsenide infrared emitting diode (GaAIAs) that is molded in an IR transmissive clear epoxy package with either a dome or flat lens. Devices feature narrow and wide irradiance patterns and a variety of electrical characteristics. The small T-1 package style makes these devices ideal for space-limited applications. OP265 devices conform to the OP505 and OP535 series devices. OP266 devices conform to OP506 series devices. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Applications: Ordering Information Space-limited applications Part LED Peak Output Power (mW/ I (mA) Total Beam Lead Applications requiring coupling F 2 Number Wavelength cm ) Min / Max Typ / Max Angle Length efficiency Battery-operated or voltage-limited OP265A 2.70 / NA applications OP265B 1.65 / 4.70 18 OP265C 0.54 / 3.30 OP265D 0.54 / NA OP265W 1.00 / NA 90 890 nm 20 / 50 0.50 OP266A 2.70 / NA OP266B 1.65 / 4.70 18 OP266C 0.54 / 3.30 OP266D 0.54 / NA OP266W 1.00 / NA 90 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue C 03/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 4 Plastic Infrared Emitting Diode OP265, OP266 Series (A, B, C, D, W) OP265 (A, B, C, D) OP265W MILLIMETERS DIMENSIONS ARE IN: INCHES OP266 (A, B, C, D) OP266W 1 2 Pin LED 1 Cathode 2 Anode CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK S molded plastics. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 03/2012 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 4 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com