Plastic Infrared Emitting Diode OP290 Series Features: Choice of narrow or wide irradiance pa ern Choice of power ranges Choice of T-1, TO-18 or T-46 package Higher power output than GaAs at equivalent LEDs Description: Each device in this series, is a gallium aluminum arsenide infrared Light Emi ng Diode (LED) that is molded in an IR- transmissive package with a wavelength centered at 890 nm, which closely matches the spectral response of silicon phototransistors, except for OP298 (AA, AB, AC, AD), which has either an 850 nm or 875 nm center wavelength. For iden ca on purposes, each LED anode lead is longer than the cathode lead. Package T-1 devices include: OP290, OP291, OP292, OP294, OP295, OP296, OP297, OP299 (A, B, C) and OP297FAB, Plas c Package TO-18 or TO-46 devices include: OP293 and OP298 (A, B, C, AA, AB, AC, AD). Each OP290, OP291 and OP292 series come in three electrical parameters op ons A, B and C. The OP290 series forward current is specied under pulse condi ons up to 1.5 amps, the OP291 series forward current is specied under pulse condi ons up to 100 milliamps and the OP292 series forward current is specied under pulse condi ons up to 1 amp. The Cathode Lead length is 0.06 (1.52 mm) shorter than the Anode Lead. The silver-copper lead frame oers excellent thermal characteris cs. Each OP293 and OP298 series come in three electrical parameter op ons A, B and C. The OP293 series has an included emission angle of 60 while the OP298 series has an included emission angle of 25. The Cathode Lead length is 0.06 (1.52 mm) shorter than the Anode Lead. These devices, which come in a variety of power ranges oering a low cost replacement for TO-18 or TO-46 herme c packages. Each OP298 series come with a high irradiance output versions with four electrical parameter op ons AA, AB, AC and AD. These power op ons are in the range of 5X greater than the A, B or C op ons. The OP298 series has an included emission angle of 25. The Cathode Lead length is 0.06 (1.52 mm) shorter than the Anode Lead. These devices, which come in a variety of power ranges o ering a low cost replacement for TO-18 or TO-46 herme c packages. OP294 and OP299 are designed for low-current or power-limited applica ons, such as ba ery supplies. They are similar to the OP290 and OP295, but use a smaller chip that increases output eciency at low current levels by increasing current density. Light output can be maximized with con nuous (D.C.) forward current up to 100 mA or with pulsed forward current up to 750 mA. The Cathode Lead length is 0.06 (1.52 mm) shorter than the Anode Lead. Each OP295, OP296 and OP297 series come in three electrical parameters op ons A, B and C. The OP295 series forward current is specied under pulse condi ons up to 5 amps, the OP296 series forward current is specied under pulse condi ons up to 2 amps and the OP297 series forward current is specied under pulse condi ons up to 1 amp. The Cathode Lead length is 0.06 (1.52 mm) shorter than the Anode Lead. The OP297FAB has a reversed polarity from the OP297A, B or C. The silver-copper lead frame oers excellent thermal characteris cs. All of these devices are spectrally and mechanically matched to the OP593 and OP598 series phototransistors. Please refer to Applica on Bulle ns 208 and 210 for addi onal design informa on and reliability (degrada on) data. Applications: Non-contact reec ve object sensor Machine automa on Door sensor Machine safety Assembly line automa on Ba ery-operated applica ons End of travel sensor RoHS General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specication without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.optekinc.com www.ttelectronics.com considered accurate at time of going to print. Issue D 07/2016 Page 1 TT electronics plc Plastic Infrared Emitting Diode OP290 Series Part Number Guide OP290 - OP299 Series OP 2 9 X X W Optek Assembly Photodiode Output Family Maximum Forward Current Electrical Specica on Varia ons: 0, 5 5 amps A Parameter A 1, 6 2 amps B Parameter B 2, 7 1 amps C Parameter C 3, 8 200 milli-amps D Parameter D 4, 9 750 milli-amps AA Parameter BA AB Parameter BB 1 AC Parameter BC AD Parameter BD T-1 Package OP290, OP291, OP292, OP294, OP295, OP296, OP297, OP299 2 Electrical Connec on A, B, C, D LED Pin X=0.060 (1.52 mm) 1 Anode 2 Cathode Electrical Connec on OP297AB LED Pin X=0.060 (1.52 mm) 1 Cathode 2 Anode TO-18, TO-46 Package OP293 & OP298 1 2 Electrical Connec on A, B, C, AA, AB, AC, AD LED Pin X=0.060 (1.52 mm) 1 Anode 2 Cathode MILLIMETERS DIMENSIONS ARE IN: INCHES General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specication without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.optekinc.com www.ttelectronics.com considered accurate at time of going to print. Issue D 07/2016 Page 2 TT electronics plc