OPV302 Features: 850nm VCSEL technology High thermal stability Low drive current High output power Narrow beam angle Description: The OPV302 is a Vertical Cavity Surface Emitting Laser (VCSEL) packaged in a dome lens TO -46 package. VCSELs offer many advantages in sensing applications when compared to infrared LEDs. These devices require substantially lower drive currents to obtain the same amount of output power as LEDs. This feature allows VCSELs to be used in low power consumption applications such as battery operated equipment. The dome lens packaging creates a narrow beam angle from the device. Long distance applications may benefit from this feature as secondary optics may be eliminated, reducing total system cost. The OPV302 is optically and spectrally compatible with Opteks standard detector products such as the OP800 series phototransistors, OP830 series photodarlingtons and the OP910 photodiode. Applications: Non-contact position sensing Photoelectric sensors Optical encoders Light curtains General Note TT Electronics Optek Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Issue C 09/2018 Page 1 TT electronics plc OPV302 Electrical Specifications Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Storage temperature range -40 to +100C Operating temperature range 0 to +85C Lead soldering temperature 1/16 inch (1.6mm) from case for 5 sec with soldering iron 260C Maximum forward peak current, continuous 12 mA Maximum reverse voltage 5 V Maximum forward current, pulsed (1 s P.W., 10% D.C.) 48 mA Electrical Characteriscti s (T = 25 C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS P Total power out 1.5 mW I = 7 mA OT F I Threshold current 3.0 mA Note 2 TH V Forward voltage 2.2 V I = 7 mA F F I Reverse current 100 nA V = 5 V R R R Series resistance 20 55 Ohms Note 3 S Slope efficiency 0.28 mW/mA Note 4 Wavelength 840 860 Nm Optical bandwidth 0.85 Nm Beam divergence 4 Degrees FWHM /T Temp coefficient of slope efficiency -0.50 %/C (0 - 70C), Note 4 /T Temp coefficient of wavelength 0.06 Nm/C (0 - 70C), I Temp variance of threshold current 1.0 mA (0 - 70C), Note 2 TH V /T Temp coefficient for forward voltage -2.5 mV/C (0 - 70C) F This component is sensitive to electrostatic discharge (ESD). To prevent ESD-induced NOTICE damage and/or degradation to equipment, take normal ESD precautions when handling this product. General Note TT Electronics Optek Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Issue C 09/2018 Page 2 TT electronics plc