Sensing and Control Vertical Cavity Surface Emitting Laser OPV300, OPV310, OPV310Y, OPV314, OPV314Y Features: 850nm VCSEL Technology Data rates up to 2.5 Gbps High thermal stability Low drive current / high output density Narrow and concentric beam angle Recommended for mul mode ber applica ons Burned in for communica on level reliability Descrip on: The OPV300 / OPV310 / OPV314 series are high performance 850nm Ver cal Cavity Surface Emi ng Laser (VCSEL). The OPV300 and OPV310 are designed to be u lized for sensing applica ons as well as air transmission of data. The OPV314 is designed for high speed communica on links. The OPV310 / OPV314 combine all the performance advantages of a VCSEL with the addi on of a power monitor diode for precise control of op cal power. The OPV310 and OPV314 have a back monitor photodiode used for op cal power management or op cal recep on for data communica on applica ons. The OPV300 / OPV310 have a at lens while the OPV314 has a microbead lens. Refer to mechanical drawings for details. The high performance 850nm VCSEL is designed for applica ons where low current is required with high on- axis op cal power. These products combine features including high speed, high output op cal power and concentric beam making it an ideal transmi er for integra on into all types of data communica ons equipment as well as for reec ve and transmissive switches. Applica ons: Fiber Channel Gigabit Ethernet ATM VSR Intra-System links Optical backplane interconnects Reflective sensing Interruptive sensing Long distance spot illumination Additional laser safety information can be found on the Optek website. See application bulletin 221. Classification is not marked on the device due to space limitations. See package outline for center- line of optical radiance. Operating devices beyond maximum rating may result in hazardous radiation exposure. RoHS General Note TT Electronics reserves the right to make changes in product specica on 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 without no ce or liability. All informa on is subject to TT Electronics own data www.optekinc.com www. electronics.com and is considered accurate at me of going to print. Issue B 07/2015 Page 1 TT electronics plc Sensing and Control Vertical Cavity Surface Emitting Laser OPV300, OPV310, OPV310Y, OPV314, OPV314Y Electrical Specica ons Absolute Maximum Ra ngs (T = 25 C unless otherwise noted) A Opera ng Temperature Range 0C to +70C Storage Temperature Range -40C to +100C Maximum Forward Peak Current, connuous 12 mA Maximum Reverse Voltage 5 V Max. Con nuous Op cal Power at 70 C 1.1 mW Lead Soldering Temperature 260C for 10 sec. Maximum Forward Current, pulsed (1 s P.W., 10% D.C.) 48 mA Notes: (1) Threshold Current is based on the two line intersec on method specied in Telcordia GR-468- Core. Line 1 from 4 mA to 6 mA. Line 2 from 0 mA to 0.5 mA. (2) Series Resistance is the slope of the Voltage-Current line from 5 to 8 mA. (3) Slope e ciency is the slope of the best t LI line from 5 mA to 8 mA using no larger than .25 mA test interval points. (4) Using data points taken for slope eciency above, delta L/delta I shall be calculated for each adjacent pair of points. Additional laser safety information can be found on the Optek website. See application bulletin 221. Classification is not marked on the device due to space limitations. See package outline for center- line of optical radiance. Operating devices beyond maximum rating may result in hazardous radiation exposure. General Note TT Electronics reserves the right to make changes in product specica on 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 without no ce or liability. All informa on is subject to TT Electronics own data www.optekinc.com www. electronics.com and is considered accurate at me of going to print. Issue B 07/2015 Page 2 TT electronics plc