HFE7192-661 Finisar

F i n i s a r Product Specification 8Gbps 850nm VCSEL, LC TOSA Package HFE7192-6x1 PRODUCT FEATURES Optional Flex Circuit High performance VCSEL Low electrical parasitic TO package with flexible interface Data rates from DC to 8.5Gbps Complete isolation between the VCSEL, Monitor Photodiode and Case Mechanically compatible with all SFF, SFP and SFP+ MSA The HFE7192-6x1 uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 1/2/4/8 Gbps data communication over multimode optical fiber for the ANSI X2.T11 Fibre Channel protocols. The optical assembly is designed to interface either 50mm or 62.5mm multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203. The HFE7192-6x1 incorporates a power monitoring photodiode that can be used for temperature compensation, average power control, and for compliance with Class 1 eye safety limits. PRODUCT SELECTION Part Number Description HFE7192-661 Differentially Driven, attenuated, LC TOSA, with 50 flex HFE7192-681 Differentially Driven, attenuated, SC TOSA Confidential and Proprietary 2014 Finisar Corporation. All rights reserved Rev. B00 Page 1 HFE7192-6x1 Product Specification Oct 2014 F i n i s a r I. Absolute Maximum Ratings Parameter Rating Storage Temperature -40 to +85C Case Operating Temperature -20 to +85C Lead Solder Temperature 260C, 10 sec. Reverse Power Supply Voltage 5V Max continuous forward current 12mA 1 ESD Exposure (Human Body Model) 150V Notice Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. Notice The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product Confidential and Proprietary 2014 Finisar Corporation. All rights reserved Rev. B00 Page 2