D28CC95UVPA12-F 2800mA Programmable LED Driver Universal (120-277V) Input Voltage Class 2, 95W Constant Current Output with 0-10V dimming Full featured programmability with 12Vdc 100mA auxiliary output Auxiliary Output Performance Output Voltage 12 Vdc Input Voltage 120 ~ 277 Vac Output Current 100 mA Input Current Max 0.90 /120V 0.39/277V 108W Input Power Max Physical 50 - 60 (Hz) Input Frequency Length 9.50 in > 0.95 Power Factor* Width 2.38 in < 20 % THD max* Height 1.58 in 18V to 34V 2.80 Amps Output Voltage Mounting Length 8.90 in (Refer to Power Curve Chart) 18V to 56V 1.70 Amps Weight (lbs) 2.6 2800mA Max. Output Current Lead Lengths (+/- 1 in) Min. Dimming Current 140mA Blk, Wht, Purple, Gray 11.5 in 95W Output Power Red(+), Blue(-) 11.5 in Standby < 2.8W 120Vac Orange, Yellow/Black, Black/Wht, Blue/Wht 11.5 in Power < 3.5W 277Vac Lead-wires are 18 AWG 105C /600V solid copper. Line Regulation 3 % Load Regulation 5 % Environmental Output Current Ripple <10% (Pk-Pk/avg) Meets FCC part 15 (Class A) EMI and RFI Inrush Current 120V: 25A / 230uS Non-Consumer Limits Peak / >50% Duration 277V: 54A / 85uS Operating -40C to 55C * Refer to charts for additional information Storage Temperature -40C to 85C - Harmonic Emissions comply with ANSI C82.77 85C max for warranty tc - Inrush current complies with NEMA 410 90C max for UL Location Rating UL Dry & Damp, Type HL Ordering Information IP Rating IP66 Order Number Description Qty/Carton Transient Protection IEEE C62.41 6kV** D28CC95UVPA12-F010C Standard Product 10 **Driver uses MOVs for transient protection. Protection: Refer to application note EVD07 at www.unvlt.com for Over Voltage, Under Voltage, Short Circuit, Over Temp additional information on Hi-Pot Testing. Safety: UL 8750 & CSA 250.13 Class P Application and operation performance specification information subject to change without notification. www.unvlt.com Page 1 of 9 January 10, 2018D28CC95UVPA12-F Programmable Features Programming System Output Current EVERset Programming Software Minimum Dimming Level Software Dim-to-Off LDPC000A Hardware Dimming Curve Configuration Tool (Linear, Linear Soft Start, Logarithmic) Driver Interface Wired via 0-10V leads Lumen Maintenance *Refer to application notes EVD10 and EVD11 at www.unvlt.com for additional information on programmable features. Wiring Diagram Output Input Red (+) Line Black LED Neutral Blue (-) Module White NTC Black/White Band LED Driver Blue/White Band Orange (+) 0-10V Aux Purple Dimming Control Yellow/Black (-) Control Violet Device NOTE: Unused Black/White and Blue/White leads must be individually capped off when thermal foldback control is not used. *Refer to application note at www.unvlt.com for additional information on programming. Application and operation performance specification information subject to change without notification. www.unvlt.com Page 2 of 9 January 10, 2018