CATALOG 128 CATALOG 128.qxd 5/12/2016 9:37 AM Page 26 tm DIN-Based VectorPak Subracks Rackmount 3U & 6U EMC Subracks EMC subracks for Compact PCI, VME64X or PXI are available off-the-shelf in assembled or kit form. Standard 19 width or custom sizes available (contact factory). Can accommodate all 3U (sin- gle height, 3.937 or 100mm) and 6U (double height, 9.187 or 233.35mm) 0.062 to 0.100 thick boards. Custom card height/depth racks available contact factory. Vectors service design, fabrication, assembly or kitting are done in-house in the USA, bringing convenience, accuracy and short lead- times to your job. 3U Subrack P/N CCA27-36-01 shown with 5 pairs of CG3-160 card guides tm Vectorpak subracks are sold fully assembled or Subrack Contents (Generic): for 3U &6U Subracks in flat-pack kit form. EMC versions are manufac- 2 Front EMC Extrusions, P/N 1440-0012-84 tured to IEEE 1101.10 & 1101.11 for use in appli- 2 Rear Extrusions, P/N 1440-0013-84 cations with EMC requirements and have conduc- 2 Aluminum side plates tive connection of all metal components. 2 M2.5 tapped nut strips for front extrusions P/N 1404-0016-84 tm 2 M2.5 tapped nut strips for rear extrusions P/N 5700202 Vectorpak CG3-series card guides sold separate- tm 2 removable rack ears (left/right), P/N 1406-1006-01 (6U) OR ly (Page 29). Vectorpak front panels, filler panels 2 Removable rack ears (left/right), P/N 1406-1003-01 (3U) (blank-off plates), ejector handles and cooling fan 2 Insulator strips , .030 PVC, P/N 5250998-84 trays all available and described at the end of this section. Specify CCA for assembled or CCK for flat-pack kit. Ordering Information Card guides sold separately in packs of 12 (enough for CCX XX - XX - XX 6 cards, on Page 29). Standard card depths: Model Numbers A = assembled subracks 160mm (6.299) K = unassembled flat-packed kit Covers (Optional) 220mm (8.661) 01 = Top & bottom, vented 280mm (11. 024) 02 = Rear fixed Depth 03 = Both 01 & 02 340mm (13.386) 3U 04 = Custom 400mm (15.748) 26 = 160mm 8.5 05 = Solid Top & Bottom 27 = 160mm 12.0 31 = 220mm 12.0 34 = 280mm 15.0 36 = 340mm 16.0 38 = 400mm 18.0 6U 28 = 160mm 10.0 29 = 160mm 12.0 30 = 160mm 15.0 32 = 220mm 12.0 33 = 280mm 15.0 35 = 340mm 16.0 37 = 400mm 18.0 Inside Width (not including flanges) 36 = 36HP 7.4(188mm) 44 = 44HP 9.0(229mm) 64 = 64HP 13(330mm) 84 = 84HP 17(432mm) P/N CCA28-84-01: with optional perforated Material & Finish: Brushed aluminum, with clear chem film top/bottom covers. 1U = 1.75 1HP = 0.200 (5.08mm) 26 Specification subject to change without notice www.vectorelect.com 800-423-5659 DIN SubracksDIN Subracks CATALOG 128 CATALOG 128.qxd 4/24/2014 10:03 AM Page 27 tm DIN-Based VectorPak Subracks Hybrid / Custom 3U & 6U EMC Subracks 5250998-84 1440-0013-84 5700202 or 5250268-84 1406-1006-01 CG3-160 Card Guides CG3-ESD 1406-1006-01 1404-0016-84 AC3-160-84-1 1404-0012-84 tm VectorPak subracks are available standard 19 or custom configurations including subsystem components such as plug-in power supplies and integrated fan cooling. Wall or panel mount, horizontal or vertical card orientation. Subracks with dividers for mixed card sizes. Backplanes and plug-in power supplies available. Custom configuration and integration available (contact factory) CCA26-36-01 with perforated top/bottom CCA28-64-01 with perforated top/bottom covers and Vector cPCI 8-slot backplane covers and Vector 7-slot VME64x backplane 27 www.v ect or elect.com 800-423-5659