DCM DC-DC Converter MIL-COTS MDCM28AP480M320A50 S CUNRTLS C US Isolated, Regulated DC Converter Features Product Ratings V = 16 V to 50 V P = 320 W IN OUT Isolated, regulated DC-DC converter V = 48.0 V OUT Up to 320 W, 6.67 A continuous I = 6.67 A OUT (28.8 V to 52.8 V Trim) 92.6% peak efficiency 3 818 W/in Power density Wide input range 16 50 Vdc Product Description Safety Extra Low Voltage (SELV) 48.0 V Nominal Output 2250 Vdc isolation The DCM Isolated, Regulated DC Converter is a DC-DC ZVS high frequency switching converter, operating from an unregulated, wide range input to generate an isolated 48.0 Vdc output. With its high frequency n Enables low-profile, high-density filtering zero voltage switching (ZVS) topology, the DCM converter Optimized for array operation consistently delivers high eciency across the input line range. Modular DCM converters and downstream DC-DC products n Up to 8 units 2560 W support ecient power distribution, providing superior power n No power derating needed system performance and connectivity from a variety of n Sharing strategy permits dissimilar line voltages unregulated power sources to the point-of-load. across an array Leveraging the thermal and density benets of Vicors ChiP Fully operational current limit packaging technology, the DCM module oers exible thermal management options with very low top and bottom side OV, OC, UV, short circuit and thermal protection thermal impedances. Thermally-adept ChiP based power 3623 through-hole ChiP package components enable customers to achieve cost eective power system solutions with previously unattainable system size, n 1.524 x 0.898 x 0.286 weight and eciency attributes, quickly and predictably. (38.72 mm x 22.8 mm x 7.26 mm) Typical Applications Radar, Range Finding Guidance Systems, Computing Motor Drive Display, GPS, Radio DCM DC-DC Converter Rev 1.3 vicorpower.com 800 927.9474 Page 1 of 25 02/2016MDCM28AP480M320A50 Typical Application DCM1 TR EN FT R1 1 L2 1 F1 1 +IN +OUT L1 1 C LOAD Vin C1 1 CDCM 1 Load -IN -OUT DCM2 TR EN FT R1 2 L2 2 F1 2 +IN +OUT L1 2 C 2 C1 2 DCM -IN -OUT DCM4 TR EN FT R1 4 L2 4 F1 4 +IN +OUT L1 4 C 4 C1 4 DCM -IN -OUT Typical Application 1: MDCM28AP480M320A50 in an array of four units DCM TR EN FT Load 1 R1 L2 F1 +IN +OUT L1 C1 C Vin LOAD -IN -OUT Non-isolated Point-of-Load Regulator Load 2 Typical Application 2: Single MDCM28AP480M320A50, to a non-isolated regulator, and direct to load DCM DC-DC Converter Rev 1.3 vicorpower.com 800 927.9474 Page 2 of 25 02/2016