DFNA1003AT5 Vishay

DFN www.vishay.com Vishay Dale Thin Film Dual Flat No Lead Molded Precision Thin Film Resistor Surface Mount Network FEATURES 0.8 mm lead pitch MSL level 1 per J-STD-020 Low profile 1 mm seated height Small size 4 mm x 4 mm size 50 % board savings over SOIC packages Wide resistance range 100 to 100 k available Custom configurations available Low TCR 25 ppm, TCR tracking to 3 ppm Ratio tolerances to 0.025 % The DFN series of precision surface mount resistor networks Material categorization: for definitions of compliance feature isolated thin film precision resistors mounted in a please see www.vishay.com/doc 99912 0.8 mm pitch 4 mm x 4 mm dual flat no lead package. The TYPICAL PERFORMANCE networks feature 50 % savings in board space over traditional SOIC packages. They are ideally suited for ABSOLUTE TRACKING applications of unity gain operational amplifiers that require TCR 25 3 close TC tracking and tight ratio tolerances over temperature. Custom configurations are available upon ABSOLUTE RATIO request. TOL. 0.1 0.05 SCHEMATIC STANDARD RESISTANCE OFFERING (R =) 1 8 7 6 5 500 10 k 1 k 20 k 2 k 50 k R R R R 1 1 1 1 4.99 k 100 k 5 k Note 1 2 3 4 Consult factory for additional R values and schematics STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 8- Resistance Range 100 to 100 k per resistor - TCR: Absolute 25 ppm/C -55 C to +125 C TCR: Tracking 3 ppm/C -55 C to +125 C Tolerance: Absolute 0.05 % to 1.0 % +25 C Tolerance: Ratio 0.025 % to 0.5 % +25 C Power Rating: Resistor 100 mW Maximum at +70 C Power Rating: Package 100 mW x number of resistors Maximum at +70 C Stability: Absolute R 0.05 % 2000 h at +70 C Stability: Ratio R 0.015 % 2000 h at +70 C Voltage Coefficient < 0.1 ppm/V - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range -55 C to +125 C - Storage Temperature Range -55 C to +150 C - Noise < -30 dB - Thermal EMF < 0.08 V/C - Shelf Life Stability: Absolute R 0.01 % 1 year at +25 C Shelf Life Stability: Ratio R 0.002 % 1 year at +25 C Revision: 28-May-15 Document Number: 60109 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000DFN www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in millimeters 3.500 0.050 4.000 0.050 Exposed Pad 85 0.300 0.050 0.800 BSC Resistance 5 6 7 Value Code DFNA 2.700 0.050 4.000 0.050 XXXX Exposed Pad MMYY 4 3 2 1 Date Pin 1 Indentification 14 2.400 Pin 1 Dot Code 0.400 0.050 Ref. Chamfer 0.300 x 45 by Marking (MMYY) (4 mm x 4 mm) BOTTOM VIEW TOP VIEW A Max. 0.900 A Nom. 0.850 0.000 - 0.050 0.203 Ref. Min. 0.800 SIDE VIEW Note Contact factory for package outlines for higher pin count or custom configurations MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Ceramic Body Molded epoxy Terminals Copper alloy Plating 100 % matte tin Marking Resistance to Solvents Per MIL-PRF-914 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: DFNA1002AT1 D F N A1 0 0 2A T 1 GLOBAL TOLERANCE AND SCHEMATIC RESISTANCE PACKAGING MODEL RATIO TOLERANCE (1) DFN A = Isolated equal The first 3 digits are Z = 0.05 % abs. 0.025 ratio TAPE AND REEL (Lead (Pb)-free) value resistors significant figures and A = 0.1 % abs. 0.05 % ratio T0 = 100 min., 100 mult (2) (e3) the last digit specifies B = 0.1 % abs. 0.1 % ratio T1 = 1000 min., 1000 mult the number of zeros C = 0.25 % abs. 0.1 % ratio T3 = 300 min., 300 mult to follow. D = 0.5 % abs. 0.1 % ratio T5 = 500 min., 500 mult F = 1.0 % abs. 0.5 % ratio TF = Full reel Example: TS = 100 min., 1 mult 1002 = 10 k 1003 = 100 k UF = TUBED 4991 = 4.99 k Notes (1) Tolerance available on 1 k and up (2) Preferred packaging code Revision: 28-May-15 Document Number: 60109 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 8