DG9408E, DG9409E www.vishay.com Vishay Siliconix 3.2 , Fast Switching Speed, +12 V / +5 V / +3 V / 5 V, 4- / 8-Channel Analog Multiplexers DESCRIPTION FEATURES The DG9408E, DG9409E uses BiCMOS wafer fabrication 3 V to 16 V single supply or 3 V to 8 V dual technology that allows the DG9408E, DG9409E to operate supply operation on single and dual supplies. Single supply voltage Low on-resistance - R : 3.2 typ. ON ranges from 3 V to 16 V while dual supply operation is Fast switching: t - 36 ns, t - 24 ns ON OFF recommended with 3 V to 8 V. Break-before-make guaranteed The DG9408E is an 8-channel single-ended analog Low leakage multiplexer designed to connect one of eight inputs to a common output as determined by a 3-bit binary address TTL, CMOS, LV logic (3 V) compatible (A , A , A ). The DG9409E is a dual 4-channel differential 0 1 2 2500 V ESD protection (HBM) analog multiplexer designed to connect one of four Material categorization: for definitions of compliance differential inputs to a common dual output as determined please see www.vishay.com/doc 99912 by its 2-bit binary address (A , A ). Break-before-make 0 1 switching action to protect against momentary crosstalk BENEFITS between adjacent channels. Fast switching speed As a committed partner to the community and the Low switch resistance environment, Vishay Siliconix manufactures this product with lead (Pb)-free device terminations. The DG9408E, Wide operation voltage range DG9409E are offered in a QFN package that has a Simple logic interface nickel-palladium-gold device terminations and is represented by the lead (Pb)-free -E4 suffix. The APPLICATIONS nickel-palladium-gold device terminations meet all the Automatic test equipment JEDEC standards for reflow and MSL ratings. Process control and automation Data acquisition systems Meters and instruments Medical and healthcare systems Communication systems Audio and video signal routing Relay replacement Battery powered systems FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG9408E DG9409E QFN16 QFN16 S A V- D 1 2 S D V- D 1b b a 16 15 14 13 16 15 14 13 S S 2 5 S S 1 12 2b 1a 1 12 GND S GND S 2 11 6 2 11 2a S EN S EN 3 3 10 3b 3 10 S S 4 7 S S 49 4b 3a 49 Decoder / driver Decoder / driver 5 56 7 8 567 8 A V+ A S A V+ A S 0 1 8 0 1 4a Top view Top view Note QFN16 package central exposed pad has no electrical connection inside the chip. It can be connected GND, V+, V-, or left floating. S16-1452-Rev. A, 25-Jul-16 Document Number: 75375 1 For technical questions, contact: analogswitchtechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000DG9408E, DG9409E www.vishay.com Vishay Siliconix TRUTH TABLE AND ORDERING INFORMATION TRUTH TABLE DG9408E TRUTH TABLE DG9409E A A A EN ON SWITCH A A EN ON SWITCH 2 1 0 1 0 XXX 1 None XX 1 None 0000 1 00 0 1 0010 2 01 0 2 0100 3 10 0 3 0110 4 11 0 4 1000 5 X = do not care 1010 6 1100 7 1110 8 For low and high voltage levels for V and V consult Digital Control parameters for specific V+ operation. See specifications AX EN tables for: Single supply 12 V Dual supply V+ = 5 V, V- = -5 V Single supply 5 V Single supply 3 V ORDERING INFORMATION TEMP. RANGE PACKAGE PART NUMBER MIN. ORDER / PACK. QUANTITY DG9408EDN-T1-GE4 Tape and reel, 2500 units 16-pin QFN (4 mm x 4 mm) -40 C to +85 C (variation 1) DG9409EDN-T1-GE4 Tape and reel, 2500 units ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise noted) A PARAMETER LIMIT UNIT Voltage referenced V+ to V- -0.3 to +18 GND to V- 18 V a Digital inputs , V , V (V-) - 0.3 to (V+) + 0.3 S D Current (any terminal except S or D) 30 Continuous current, S or D 100 mA Peak current, S or D (pulsed at 1 ms, 10 % duty cycle max.) 200 d Package solder reflow conditions (lead (Pb)-free assembly) 16-pin (4 x 4 mm) QFN 260 +0 / -5 C Storage temperature -65 to +150 b c Power dissipation (package) , (T = 70 C) 16-pin (4 x 4 mm) QFN 1880 mW A ESD human body model (HBM), per ANSI / ESDA / JEDEC JS-001 2500 V Latch up current, per JESD78 400 mA Notes a. Signals on SX, DX or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads soldered or welded to PC board. c. Derate 23.5 mW/C above 70 C. d. Manual soldering with soldering iron is not recommended for leadless components. The QFN is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S16-1452-Rev. A, 25-Jul-16 Document Number: 75375 2 For technical questions, contact: analogswitchtechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000