EB4 www.vishay.com Vishay Dale Edgeboard Connectors, Dual Readout, 0.100 (2.54 mm) C-C, Standard and Right Angle Terminals FEATURES Grid patterns: 0.100 C-C x 0.150 (2.54 mm x 3.81 mm) and 0.100 C-C x 0.200 (2.54 mm x 5.08 mm) Standard and right angle terminals Greater design latitude: body materials: glass-filled polyester and glass-filled polyphenylene sulfide 7 contact termination styles - 3 standard, 4 right angle 20 body sizes and 6 mounting styles Selective gold plating Accepts PC board thickness of 0.054 to 0.071 (1.37 mm to 1.80 mm) Polarization between contact positions in all sizes. Between contact polarization permits polarizing without loss of contact position ELECTRICAL SPECIFICATIONS Current Rating: 3 A APPLICATIONS Test Voltage Between Contacts: For use with 0.0625 (1.59 mm) printed circuit boards at sea level: 650 V RMS requiring an edgeboard type connector on 0.100 (2.54 mm) At 70 000 feet (21 336 meters): 275 V RMS centers Insulation Resistance: 5000 M minimum at 500 V DC potential MATERIAL SPECIFICATIONS Contact Resistance: 30 mV maximum at rated current (with Body Material: gold plating) 3 thermoplastic polyester, glass-filled, black, flame Operating Temperature: -65 C to +125 C retardant (UL 94 V-0) Humidity: 96 h at 90 % relative humidity at +40 C, dried at 5 thermoplastic polyphenylene sulfied, glass filled, brown, room temperature for 3 h minimum, insulation resistance flame retardant (UL 94 V-0) was greater than 5000 M Contacts: phosphor bronze (see Ordering Information) Durability: after 500 cycles of insertion and withdrawal of a Polarizing Key: glass reinforced nylon, flame retardant 0.070 (1.78 mm) thick steel test board, contact resistance (UL 94H-B) less than 0.030 V at 3 A on gold plated contacts and individual contact pair separation force when measured with Plating: gold (see Ordering Information) a 0.054 (1.37 mm) thick steel test blade was greater than oz. Shock: three 50G shocks in each of 3 mutually perpendicular planes with no loss of continuity Vibration: 2 h in each of 3 mutually perpendicular planes, frequency sweep 10 cps to 55 cps at 0.06 double amplitude with no loss of continuity ORDERING INFORMATION EB4 3 K 20 SG X 15 MODEL BODY STANDARD CONTACTS CONTACT PLATING MOUNTING POLARIZING MATERIAL TERMINAL PER SIDE VARIATIONS KEY POSITIONS VARIATIONS SG = selective gold plating (0.00003 6, 10, 12, (0.000762 mm) minimum thick) on contact 3 = glass-filled Key(s) are located to C, D, K, 15, 18, 20, area with gold flash on terminal. polyester right of position(s) 1R, 2R, 22, 25, 28, SGF = selective gold plating (0.000010 5 = glass-filled designated. Use odd- 3R, 4R 30, 31, 35, (0.000254 mm) minimum thick) on contact polyphenylene numbered contact for 36, 40, 43, area with gold flash on terminal. sulfide ordering: -1, -3, -5, etc. 44, 48, 49, All gold plating over 0.00005 Required only when 50, 60, (0.00127 mm) minimum nickel underplate. polarizing keys are to be and 65 Contact factory for additional plating factory installed. options Note: to order polarizing keys individually, specify model PK-4. Revision: 16-Feb-09 Document Number: 36001 1 For technical questions, contact: connectors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 EB4 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 0.060 (1.52) 0.342 0.050 0.287 R Typ. (1.27) (8.69) (7.29) Typ. Typ. A B C 0.100 D (2.54) Typ. E J J 0.060 (1.52) Typ. See table for 0.365 contact and 0.250 (9.27) Section J - J mounting variations (6.35) Typ. 0.054 - 0.071 (1.37 - 1.80) 0.180 (4.57) Card Thickness 0.430 Typ. (10.92) Typ. 0.125 (3.17) 0.300 (7.62) 0.610 (15.49) Depth of Point of Typ. Contact Insertion 0.150 (3.81) Polarizing Key: 0.295 When ordering polarizing keys individually, (7.49) specify by the Model Number: PK-4 between contacts. Hand insertion tool, 0.031 (0.787) TPK-4, provided upon request. 0.096 0.002 0.200 (2.44 0.051) (5.08) OF CONTACT POSITIONS AB C D E PER SIDE 6 1.435 (36.45) 1.175 (29.85) 0.700 (17.78) 0.860 (21.84) 0.750 (19.05) 10 1.835 (46.61) 1.575 (40.00) 1.100 (27.94) 1.260 (32.00) 1.150 (29.21) 12 2.035 (51.69) 1.775 (45.08) 1.300 (33.02) 1.460 (37.08) 1.350 (34.29) 15 2.335 (59.31) 2.075 (52.70) 1.600 (40.64) 1.760 (44.70) 1.650 (41.91) 18 2.635 (66.93) 2.375 (60.32) 1.900 (48.26) 2.060 (52.32) 1.950 (49.53) 20 2.835 (72.01) 2.575 (65.40) 2.100 (53.34) 2.260 (57.40) 2.150 (54.61) 22 3.035 (77.09) 2.775 (70.48) 2.300 (58.42) 2.460 (62.48) 2.350 (59.69) 25 3.335 (84.71) 3.075 (78.10) 2.600 (66.04) 2.760 (70.10) 2.650 (67.31) 28 3.635 (92.33) 3.375 (85.72) 2.900 (73.66) 3.060 (77.72) 2.950 (74.93) 30 3.835 (97.41) 3.575 (90.80) 3.100 (78.74) 3.260 (82.80) 3.150 (80.01) 31 3.935 (99.95) 3.675 (93.34) 3.200 (81.28) 3.360 (85.34) 3.250 (82.55) 35 4.335 (110.11) 4.075 (103.50) 3.600 (91.44) 3.760 (95.50) 3.650 (92.71) 36 4.435 (112.65) 4.175 (106.04) 3.700 (93.98) 3.860 (98.04) 3.750 (95.25) 40 4.835 (122.81) 4.575 (116.20) 4.100 (104.14) 4.260 (108.20) 4.150 (105.41) 43 5.135 (130.43) 4.875 (123.82) 4.400 (111.76) 4.560 (115.82) 4.450 (113.03) 44 5.235 (132.97) 4.975 (126.36) 4.500 (114.30) 4.660 (118.36) 4.550 (115.57) 48 5.635 (143.13) 5.375 (136.52) 4.900 (124.46) 5.060 (128.52) 4.950 (125.73) 49 5.735 (145.67) 5.475 (139.06) 5.000 (127.00) 5.160 (131.06) 5.050 (128.27) 50 5.835 (148.21) 5.575 (141.60) 5.100 (129.54) 5.260 (133.60) 5.150 (130.81) 60 6.835 (173.61) 6.575 (167.00) 6.100 (154.94) 6.260 (159.00) 6.150 (156.21) 65 7.335 (186.31) 7.075 (179.70) 6.600 (167.64) 6.760 (171.70) 6.650 (168.91) Revision: 16-Feb-09 Document Number: 36001 2 For technical questions, contact: connectors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000