EB7S
Vishay Dale
Edgeboard Connectors, Single Readout
FEATURES
0.156" (3.96 mm) C-C
Bifurcated bellows contacts provide 2 flexing contact
surfaces to assure positive contact under adverse
conditions such as vibration or PC board irregularities
Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
ELECTRICAL SPECIFICATIONS to 1.80 mm)
Current Rating: 5 A
Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without
Test Voltage Between Contacts:
loss of contact position
At sea level: 1800 V
RMS
At 70 000 feet (21 336 meters): 450 V
Selective gold plating
RMS
Insulation Resistance: 5000 M minimum at 500 V
Polarizing key is reinforced nylon, may be inserted by
DC
potential
hand, requires no adhesive.
Contact Resistance: 30 mV maximum at rated current (with
Protected entry, provided by recessed leading edge of
gold plating)
contact, permits the card slot to straighten and align the
board before electrical contact is made. Prevents damage
Operating Temperature: - 55 C to + 125 C
to contact which might be caused by warped or out of
Humidity: 96 h at 90 % relative humidity at + 40 C, dried at
tolerance boards
room temperature for 3 h minimum, insulation resistance
Recognized under the Component Program of
was greater than 5000 M
Underwriters Laboratories, Inc. listed under file
Durability: (With gold plating) After 500 cycles of insertion
E65524, project 77CH3889
and withdrawal of a 0.070" (1.78 mm) thick steel test
gauge, contact resistance less than 0.030 V at 5 A and
individual contact retention force when measured with 0.054"
APPLICATIONS
(1.37 mm) thick steel test slug greater than oz.
For use with 0.062" (1.57 mm) printed circuit boards requiring
Shock: Three 50G shocks in each of 3 mutually
an edgeboard type connector on 0.156" (3.96 mm) centers
perpendicular planes with no loss of continuity
Vibration: 2 h in each of 3 mutually perpendicular planes,
MATERIAL SPECIFICATIONS
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
Body: (Standard) glass-filled phenolic per MIL-M-14, dark
with no loss of continuity
green, flame retardant (UL 94 V-0). (Optional - see Ordering
Information)
PHYSICAL SPECIFICATIONS
1 glass-filled diallyl phtalate per MIL-M-14, type SDG-F
Contact Type: Bifurcated bellows
green, flame retardant (UL 94 V-0)
Number of Contacts: 6, 10, 12, 15, 18, and 22
3 thermoplastic polyester, glass-filled, black, flame
retardant (UL 94 V-0)
Contact Spacing: 0.156" (3.96 mm) center to center
Contacts: Phosphor bronze
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Polarizing Key: Glass reinforced nylon, flame retardant
Card Slot Depth: Single readout = 0.300" (7.62 mm)
(UL 94H-B)
Note
High temperature burn-in, edgeboard connectors, 0.156" Contact Plating: Gold (See Ordering Information)
(3.96 mm) center to center are on www.vishay.com/doc?36006
ORDERING INFORMATION
EB7 1 S A 22 SG X A
MODEL BODY MATERIAL SINGLE STANDARD CONTACTS CONTACT PLATING MOUNTING POLARIZING
READOUT TERMINAL VARIATIONS
KEY POSITIONS
VARIATIONS SG = Selective gold plating
Optional body
6, 10, 12, (0.00003" (0.000762 mm)
material Key(s) are located to
A or B 15, 18, minimum thick) on contact area
1 = Diallyl right of position(s)
or 22 with gold flash on terminal
Phthalate designated. Required
SGF = Selective gold plating
only when polarizing
3 = Glass-filled
(0.000010" (0.000254 mm)
keys are to be factory
Polyester
minimum thick) on contact area
installed
= Omit number
with gold flash on terminal.
for standard
All gold plating over 0.00005"
pheniolic
(0.00127 mm) minimum nickel
underplate.
Contact factory for additional
plating options.
Document Number: 36004 For technical questions, contact: connectors@vishay.com www.vishay.com
Revision: 16-Feb-09 11EB7S
Edgeboard Connectors, Single Readout
Vishay Dale
DIMENSIONS in inches (millimeters)
0.030 (0.762)
0.062 0.010
(1.57 0.254)
R Typ.
A
B
D
E
C
C
0.156 0.005
(3.96 0.127)
See Table
Non-Cumulative
for Mounting
Variations
See Table
for Terminal
Variations
0.250
(6.35)
0.328 0.010
0.440
(8.33 0.254)
(11.18)
Section C to C: Polarizing Key:
Type A
0.054 to 0.071
0.028
(1.37 to 1.80) (0.711)
0.230
(5.84)
0.300 (7.62)
Depth of
0.245
Card Insertion (6.22)
When ordering polarizing keys individually, specify by the
Model Number:
PK-7 between contacts. Hand insertion tool, TPK-7,
0.016 (0.410)
provided upon request.
# OF CONTACT
AB D E
POSITIONS
6 1.78 (45.21) 1.531 (38.89) 1.218 (30.94) 1.100 (27.94)
10 2.41 (61.21) 2.156 (54.76) 1.843 (46.81) 1.724 (43.79)
12 2.72 (69.09) 2.468 (62.69) 2.156 (54.76) 2.036 (51.71)
15 3.19 (81.03) 2.937 (74.60) 2.624 (66.65) 2.504 (63.60)
18 3.66 (92.96) 3.406 (86.51) 3.093 (78.56) 2.972 (75.49)
22 4.28 (108.71) 4.031 (102.39) 3.717 (94.41) 3.596 (91.34)
www.vishay.com For technical questions, contact: connectors@vishay.com Document Number: 36004
12 Revision: 16-Feb-09