G16
www.vishay.com
Vishay Dale
Rack and Panel Connectors Side Mount
FEATURES
Body components available with any desired pin and
socket combination
Floating contacts aid in withstanding vibration
Locking device permits secure mount of individual sections
or complete component
G16P-AB G16P-AB
MATERIAL SPECIFICATIONS
Standard Body: Glass-filled diallyl phthalate per ASTM
APPLICATIONS
D 5948-96 green, flame retardant
Broad - limited only by those applications requiring physical,
Pin Contacts: Brass
electrical and/or materials specifications exceeding those
Socket Contacts: Phosphor bronze
indicated.
Contact Plating: Gold, 10 micro-inches
ELECTRICAL SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Current Rating: 13 A
Minimum Creepage between Contacts: 0.20" [5.16 mm]
Breakdown Voltage (Contact to Contact):
Minimum Air Space between Contacts: 0.16" [3.97 mm]
At sea level: 4000 V
RMS
Maximum Wire Size: #16 AWG
At 70 000 feet [21 336 meters]: 550 V
RMS
DIMENSIONS in inches [millimeters]
G16S-AB
G16P-AB
0.218
0.218
[5.54]
[5.54]
0.44
0.44
[11.1]
[11.1]
0.250
Body
0.250 [6.35]
[6.35]
0.75 0.53 [13.5]
0.062 [1.59]
Solder Cup
[19.1]
Dia. Typ.
#16 AWG Wire
0.25
[6.35] 0.25
[6.35]
0.089 [2.26] Dia.
thru 82 CSK
Pin Contact
0.089 [2.26] Dia. thru 82
0.34 0.203 [5.16] Dia.
Socket
CSK 0.203 [5.16] Dia.
[8.7] C Ring Both Sides,
Contact
Both Sides, 1 Hole
1 Hole
0.34
0.53
[8.7]
[13.5]
ORDERING INFORMATION
AB
S B
G16
P A
BODY STYLE CONTACT VARIATIONS
MODEL
G16 - Side Mount with 2 P - Pin style body. S - Socket style body. Designates pin contact positions in
positions for #16 AWG contacts These designators are used to identify mating G16P connector and socket contact
connectors. If designator 3 is the same, a positions in a G16S connector
connector designated G16P will mate with a
connector designated G16S
EXAMPLE 1: EXAMPLE 2: EXAMPLE 3: EXAMPLE 4:
G16P-AB = Connector with pin G16S-AB = Connector with socket G16P-A = Connector with pin G16S-A = Connector with socket
contacts in position A and B contacts in positions A and B contact in position A and a contact in position A and a pin
(would mate with Example 1 at left) socket contact in position B contact in position B (would
mate with Example 3 at left)
Revision: 30-Jun-14 Document Number: 36019
1
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customers responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customers
technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12 Document Number: 91000
1