333 3 MSMP6.0A thru MSMP20A www.vishay.com Vishay General Semiconductor Surface-Mount TRANSZORB Transient Voltage Suppressors FEATURES Very low profile - typical height of 0.65 mm eSMP Series Ideal for automated placement Oxide planar chip junction Unidirectional polarity only Peak pulse power: 150 W (10/1000 s) ESD capability: 15 kV (air), 8 kV (contact) Top View Bottom View Meets MSL level 1, per J-STD-020C, LF maximum peak MicroSMP (DO-219AD) of 260 C Material categorization: for definitions of compliance Cathode Anode please see www.vishay.com/doc 99912 TYPICAL APPLICATIONS LINKS TO ADDITIONAL RESOURCES Use in sensitive electronics protection against voltage transients induced by inductive load switching and lightin g 3D Models on ICs, MOSFET, signal lines of sensor units for protecting sensitive equipment against transient overvoltages. PRIMARY CHARACTERISTICS MECHANICAL DATA V 6.67 V to 24.5 V BR Case: MicroSMP (DO-219AD) V 6.0 V to 20 V Molding compound meets UL 94 V-0 flammability rating WM Base P/N-M3 - halogen-free, RoHS-compliant, and P (10 x 1000 s) 150 W PPM commercial grade T max. 150 C J Terminals: matte tin plated leads, solderable per Polarity Unidirectional J-STD-002 and JESD 22-B102 Package MicroSMP (DO-219AD) M3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes the cathode end MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1)(2) Peak power dissipation with a 10/1000 s waveform (fig. 1) P 150 W PPM (1) Peak pulse current with a 10/1000 s waveform I See next table A PPM (2) Power dissipation T = 120 C P 1.0 M D W (3) Power dissipation T = 25 C P 0.5 A D Operating junction and storage temperature range T , T -55 to +150 C J STG Notes (1) Non-repetitive current pulse, per fig. 1 (2) Mounted on 6.0 mm x 6.0 mm copper pads to each terminal (3) Mounted on minimum recommended pad layout Revision: 09-Nov-2020 Document Number: 89457 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D MSMP6.0A thru MSMP20A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM MAXIMUM R R D D VOLTAGE TEST STAND-OFF REVERSE V AT I V AT I C PPM C PPM DEVICE (1) DEVICE V AT I CURRENT VOLTAGE LEAKAGE BR T MARKING 10/1000 s 8/20 s TYPE (V) I V CURRENT T WM CODE (mA) (V) I AT V R WM MIN. MAX. V (V) I (A) R ()V (V) I (A) R () C PPM D C PPM D (A) MSMP6.0A AG 6.67 7.37 10 6.0 200 10.3 14.6 0.201 13.7 73.0 0.087 MSMP6.5A AK 7.22 7.98 10 6.5 100 11.2 13.4 0.240 14.5 69.0 0.095 MSMP7.0A AM 7.78 8.60 10 7.0 50 12.0 12.5 0.272 15.7 63.7 0.111 MSMP7.5A AP 8.33 9.21 1.0 7.5 50 12.9 11.6 0.317 17.0 58.8 0.132 MSMP8.0A AR 8.89 9.83 1.0 8.0 20 13.6 11.0 0.342 18.2 54.9 0.152 MSMP8.5A AT 9.44 10.4 1.0 8.5 2.0 14.4 10.4 0.384 19.5 51.3 0.177 MSMP9.0A AV 10.0 11.1 1.0 9.0 2.0 15.4 9.7 0.441 20.6 48.6 0.195 MSMP10A AX 11.1 12.3 1.0 10 1.0 17.0 8.8 0.533 21.7 46.1 0.204 MSMP11A AZ 12.2 13.5 1.0 11 1.0 18.2 8.2 0.570 24.4 41.0 0.266 MSMP12A BE 13.3 14.7 1.0 12 1.0 19.9 7.5 0.690 25.3 39.5 0.268 MSMP13A BG 14.4 15.9 1.0 13 1.0 21.5 7.0 0.803 27.2 36.8 0.307 MSMP14A BK 15.6 17.2 1.0 14 1.0 23.2 6.5 0.928 29.5 33.9 0.364 MSMP15A BM 16.7 18.5 1.0 15 1.0 24.4 6.2 0.960 32.5 30.8 0.455 MSMP16A BP 17.8 19.7 1.0 16 1.0 26.0 5.8 1.092 34.7 28.8 0.520 MSMP17A BR 18.9 20.9 1.0 17 1.0 27.6 5.4 1.233 36.8 27.2 0.586 MSMP18A BT 20.0 22.1 1.0 18 1.0 29.2 5.1 1.382 39.3 25.4 0.676 MSMP20A BV 22.2 24.5 1.0 20 1.0 32.4 4.6 1.706 42.8 23.4 0.783 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per Fig. 1 and derate per Fig. 3 (3) To calculate maximum clamping voltage at surge current uses the following formula: V = R x I + V CL max. D PP BR max. THERMAL CHARACTERISTICS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUEUNIT (1) R 250 JA Typical thermal resistance C/W (2) R 30 JM Notes (1) Free air, mounted on recommended PCB 1 oz. pad area thermal resistance R - junction to ambient JA (2) Units mounted on PCB with 6.0 mm x 6.0 mm copper pad areas R - junction to mount JM IMMUNITY TO STATIC ELECTRICAL DISCHARGE TO THE FOLLOWING STANDARDS (T = 25 C unless otherwise noted) A STANDARD TEST TYPE TEST CONDITIONS SYMBOL CLASS VALUE AEC-Q101-001 Human body model (contact mode) C = 100 pF, R = 1.5 k H3B > 8 kV V C (2) (1) IEC 61000-4-2 Human body model (air discharge mode) C = 150 pF, R = 330 4> 15 kV Notes (1) Immunity to IEC 61000-4-2 air discharge mode has a typical performance > 30 kV (2) System ESD standard ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE MSMP6.0A-M3/89A 0.006 89A 4500 7 diameter plastic tape and reel Revision: 09-Nov-2020 Document Number: 89457 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000