333 3 NTCALUG01T www.vishay.com Vishay BCcomponents NTC Thermistors, Standard Lug Sensors, 150 C FEATURES 150 C long term stability (5000 h dry heat) Easy mounting using ring tongue terminal Available Rugged construction Cable with ETFE insulation according to NEMA HP-3, type Z, rated 600 V , cable test RMS voltage 3.4 kV AEC-Q200 qualified (grade 1) UL recognized, file E148885 (UL category XGPU2) Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 ADDITIONAL RESOURCES APPLICATIONS Suitable for surface sensing applications, especially when 3D Models Design Tools Models a good electrical insulation and a good thermal contact with the chassis is required for: NTC curve computation: - Automotive equipment www.vishay.com/thermistors/ntc-curve-list/ - EV and battery management QUICK REFERENCE DATA - Power electronics, heat sink PARAMETER VALUE UNIT - Consumer appliances (1) Resistance value at 25 C 10K DESCRIPTION (1) Tolerance on R -value 1 to 2 % 25 A NTC thermistor chip is soldered to AWG 26 (1) B -value 3435, 3984 K 25/85 multi-stranded silver plated copper leads with ETFE Tolerance on B -value 0.5 to 1 % 25/85 insulation and insulated with epoxy coating. The insulated Operating temperature range sensor is attached to a tin plated copper ring lug via a middle -40 to +150 C at zero dissipation buffer layer. The lead wires are twisted. Min. dielectric withstanding voltage between terminals 2700 V MOUNTING AC and lug By means of M3 (stud 3, 4) or M3,5 (stud 5, 6) screw. Min. insulation resistance between Leads to be soldered or crimped 100 M terminals and lug at 500 V DC The device is suitable for screwing e.g. on metal surface Weight 2.0 to 3.2 g The leads are suitable for soldering e.g. on PCB Note Consult Vishay for other cable length, cable section , (1) Other R -values, B -values, and tolerances are available 25 25/85 screw sizes, insulation, connector crimping or other upon request features ELECTRICAL DATA AND ORDERING INFORMATION SAP MATERIAL AND ORDERING NUMBER R R -TOL. B B -TOL. L 25 25 25/85 25/85 1 DESCRIPTION RoHS COMPLIANT () ( %) (K) ( %) (mm) RoHS COMPLIANT (1) WITH EXEMPTION NTC Lug01T 10K 1 % 3984 K 10 000 1 3984 0.5 150 10 NTCALUG01T103F NTCALUG01T103FA 150 C ETFE AWG26 150 mm NTC Lug01T 10K 1 % 3435 K 10 000 1 3435 1.0 150 10 NTCALUG01T103FL NTCALUG01T103FLA 150 C ETFE AWG26 150 mm NTC Lug01T 10K 2 % 3984 K 10 000 2 3984 0.5 40 5 NTCALUG01T103G400 NTCALUG01T103G400A 150 C ETFE AWG26 40 mm NTC Lug01T 10K 2 % 3984 K 10 000 2 3984 0.5 150 10 NTCALUG01T103G NTCALUG01T103GA 150 C ETFE AWG26 150 mm NTC Lug01T 10K 2 % 3984 K 10 000 2 3984 0.5 200 10 NTCALUG01T103G201 NTCALUG01T103G201A 150 C ETFE AWG26 200 mm NTC Lug01T 10K 2 % 3984 K 10 000 2 3984 0.5 500 10 NTCALUG01T103G501 NTCALUG01T103G501A 150 C ETFE AWG26 500 mm Note (1) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound Revision: 28-Aug-2019 Document Number: 29164 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D NTCALUG01T www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters T D2 D3 D4 D1 L2 E L1 L3 L L D D D TL ED 1 2 1 2 3 3 4 Refer to the ordering 3.8 1 3.7 +0.2 / -0 7.2 0.2 5.6 +0.3 / -0.2 1.0 15.70 0.3 6.2 0.2 0.93 0.1 table Revision: 28-Aug-2019 Document Number: 29164 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000