OLED-020N004A-GPP5N00000 www.vishay.com Vishay 20 x 4 Character OLED FEATURES Type: character Display format: 20 x 4 characters Built-in controller: OLED-0010 Duty cycle: 1/16 +5 V power supply Interface: 6800 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 MECHANICAL DATA ABSOLUTE MAXIMUM RATINGS ITEM STANDARD VALUE UNIT STANDARD VALUE ITEM SYMBOL UNIT Module dimension 98.0 x 60.0 x 10.0 (max.) MIN. MAX. Viewing area 77.0 x 25.2 Supply voltage V to V -0.3 5.3 V DD SS for logic Active area 70.16 x 20.95 Operating T -40 +80 Dot size 0.54 x 0.55 OP temperature mm C Dot pitch 0.59 x 0.60 Storage T -40 +80 STG temperature Mounting hole 93.0 x 55.0 Character size 2.9 x 4.75 Character pitch 3.54 x 5.4 ELECTRICAL CHARACTERISTICS STANDARD VALUE ITEM SYMBOL CONDITION UNIT MIN. TYP. MAX. Supply voltage for logic V to V - 4.8 5.0 5.3 DD SS Input high voltage V - 0.8 V -V IH DD DD Input low voltage V - GND - 0.2 V V IL DD Output high voltage V I = -0.5 mA 0.8 V -V OH OH DD DD Output low voltage V I = 0.5 mA GND - 0.2 V OL OL DD 50 % check board operating current I V = 5 V 465563 mA DD DD Note When you use 5 V for V , please do not use 3 V or 3.3 V for logic I/O, this will cause module does not work. DD OPTIONS EMITTING COLOR MOQ YELLOW GREEN RED BLUE WHITE YELLOW GREEN RED BLUE WHITE - Yes ---- Yes - -- Revision: 09-Aug-16 Document Number: 37809 1 For technical questions, contact: displays vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 OLED-020N004A-GPP5N00000 www.vishay.com Vishay INTERFACE PIN FUNCTION PIN NO. SYMBOL FUNCTION 1V Ground (0 V) SS 2V Supply voltage for logic (5.0 V) DD 3 NC No connection 4 RS H / L, H: data L: instruction code 5 R / W H / L, H: read (module MPU) L: write (MPU module) 6E H, H L, chip enable signal 7 DB0 H / L, data bit 0 8 DB1 H / L, data bit 1 9 DB2 H / L, data bit 2 10 DB3 H / L, data bit 3 11 DB4 H / L, data bit 4 12 DB5 H / L, data bit 5 13 DB6 H / L, data bit 6 14 DB7 H / L, data bit 7 15 NC No connection 16 NC No connection DIMENSIONS in millimeters 98.0 0.5 2.00 94.0 10.50 77.0 (VA) 70.16 (AA) 13.63 10.0 P2.54 x 15 = 38.10 10.00 max. 3.54 2.0 4.7 2.9 0.59 0.54 1 16 16 x 1.0 PTH DOT SIZE 49.0 1.60 4 x 2.5 PTH 4 x 5.0 PAD 2.50 93.0 The non-specified tolerance of dimen sion is 0.3 mm. Revision: 09-Aug-16 Document Number: 37809 2 For technical questions, contact: displays vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 60.0 0.5 32.0 14.00 25.20 (VA) 17.40 20.95 (AA) 19.52 2.50 0.8 28.6 2.50 55.0 5.4 4.75 0.6 0.55