ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output (Dual, Quad Channel)
FEATURES
A 1 8 E
Dual Channel
C 2 7 C Current transfer ratio at I = 10 mA
F
C 3 6 C
Isolation test voltage, 5300 V
RMS
E
A 4 5
Compliant to RoHS Directive 2002/95/EC and
1 16
A E in accordance to WEEE 2002/96/EC
C 2 15 C
C 3 14 C AGENCY APPROVALS
A 4 13 E
Quad Channel
UL1577, file no. E52744 system code H, double protection
A
5 12 E
CSA 93751
C 6 11 C
C 7 10 C
BSI IEC 60950; IEC 60065
A E
8 9
i179015-3 DIN EN 60747-5-2 (VDE 0884) available with option 1
V
DE
FIMKO
i179012-1
DESCRIPTION
The ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 are optically coupled
isolated pairs employing GaAs infrared LEDs and silicon
NPN phototransistor. Signal information, including a DC
level, can be transmitted by the drive while maintaining a
high degree of electrical isolation between input and output.
The ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5 are especially
designed for driving medium-speed logic and can be used
to eliminate troublesome ground loop and noise problems.
Also these couplers can be used to replace relays and
transformers in many digital interface applications such as
CTR modulation.
The ILD1, ILD2, ILD5 has two isolated channels in a single
DIP package and the ILQ1, ILQ2, ILQ5 has four isolated
channels per package.
ORDERING INFORMATION
DIP-# Option 6
I L x # - X 0## T
10.16 mm
7.62 mm
PART NUMBER PACKAGE OPTION TAPE AND
Option 7 Option 9
REEL
x = D (Dual) or Q (Quad)
> 0.1 mm
> 0.7 mm
DUAL CHANNEL QUAD CHANNEL
AGENCY CERTIFIED/PACKAGE
CTR (%)
UL, CSA, BSI, FIMKO 20 to 300 100 to 500 50 to 400 20 to 300 100 to 500 50 to 400
DIP-8 ILD1ILD2ILD5---
DIP-8, 400 mil, option 6 - ILD2-X006 - - - -
(1) (1)
SMD-8, option 7 ILD1-X007T ILD2-X007T -- --
(1) (1) (1)
SMD-8, option 9 ILD1-X009T ILD2-X009T ILD5-X009T -- -
DIP-16 ---ILQ1ILQ2ILQ5
DIP-16, 400 mil, option 6 - - - ILQ1-X006 ILQ2-X006 -
(1)
SMD-16, option 7 - - - ILQ1-X007 ILQ2-X007T -
(1) (1) (1)
SMD-16, option 9 - - - ILQ1-X009T ILQ2-X009T ILQ5-X009T
Rev. 1.8, 28-Jun-11 Document Number: 83646
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD1, ILD2, ILD5, ILQ1, ILQ2, ILQ5
www.vishay.com
Vishay Semiconductors
DUAL CHANNEL QUAD CHANNEL
AGENCY CERTIFIED/PACKAGE
CTR (%)
VDE, UL, CSA, BSI, FIMKO 20 to 300 100 to 500 50 to 400 20 to 300 100 to 500 50 to 400
DIP-8 ILD1-X001ILD2-X001ILD5-X001- --
DIP-8, 400 mil, option 6 - ILD2-X016 - - - -
SMD-8, option 7 - ILD2-X017 - - - -
SMD-8, option 9 ILD1-X019T - - - - -
DIP-16 ----ILQ2-X001-
DIP-16, 400 mil, option 6 - - - - ILQ2-X016 -
(1)
SMD-16, option 7 - - - - ILQ2-X017T -
Notes
Additional options may be possible, please contact sales office.
(1)
Also available in tubes; do not put T on end.
ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified)
amb
PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT
INPUT
Reverse voltage V 6V
R
Forward current I 60 mA
F
Surge current I 2.5 A
FSM
Power dissipation P 100 mW
diss
Derate linearly from 25 C 1.3 mW/C
OUTPUT
ILD1 V 50 V
CEO
ILQ1 V 50 V
CEO
ILD2 V 70 V
CEO
Collector emitter reverse voltage
ILQ2 V 70 V
CEO
ILD5 V 70 V
CEO
ILQ5 V 70 V
CEO
I 50 mA
C
Collector current
t < 1 ms I 400 mA
C
Power dissipation P 200 mW
diss
Derate lineary from 25 C 2.6 mW/C
COUPLER
Isolation test voltage
V 5300 V
ISO RMS
between emitter and detector
Creepage distance 7mm
Clearance distance 7mm
12
V = 500 V, T = 25 C R 10
IO amb IO
Isolation resistance
11
V = 500 V, T = 100 C R 10
IO amb IO
Package power dissipation P 250 mW
tot
Derate linearly from 25 C 3.3 mW/C
Storage temperature T - 40 to + 150 C
stg
Operating temperature T - 40 to + 100 C
amb
Junction temperature T 100 C
j
(2)
Soldering temperature 2 mm from case bottom T 260 C
sld
Notes
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1)
Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for throught
hole devices (DIP).
Rev. 1.8, 28-Jun-11 Document Number: 83646
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000