SFH615A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS FEATURES Excellent CTR linearity depending on forward current Isolation test voltage, 5300 V RMS 1 4 A C Fast switching times Low CTR degradation 2 3 C E Low coupling capacitance Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 17918-20 APPLICATIONS DESCRIPTION Switchmode power supply The SFH615A feature a variety of transfer ratios, low Telecom coupling capacitance and high isolation voltage. These Battery powered equipment couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor AGENCY APPROVALS detector, and is incorporated in a plastic DIP-4 package. UL file no. E52744 The coupling devices are designed for signal transmission cUL tested to CSA 22.2 bulletin 5A between two electrically separated circuits. DIN EN 60747-5-5 (VDE 0884-5) available with option 1 The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8 mm are achieved BSI EN 60950 EN 60065 with option 6. This version complies with IEC 60950 FIMKO (DIN VDE 0805) for reinforced insulation up to an operation CQC voltage of 400 V or DC. Specifications subject to RMS change. ORDERING INFORMATION DIP-4 Option 6 SF H 6 1 5 A - X 0 T PART NUMBER CTR PACKAGE OPTION TAPE 7.62 mm 10.16 mm BIN AND Option 7 Option 9 REEL > 8 mm 8 mm typ. AGENCY CERTIFIED/PACKAGE CTR (%) UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320 DIP-4 SFH615A-1 SFH615A-2 SFH615A-3 SFH615A-4 DIP-4, 400 mil, option 6 SFH615A-1X006 SFH615A-2X006 SFH615A-3X006 - (1) SMD-4, option 7 - - SFH615A-3X007T - (1) SMD-4, option 9 - SFH615A-2X009T SFH615A-3X009T SFH615A-4X009 UL, cUL, VDE, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320 DIP-4 SFH615A-1X001 SFH615A-2X001 SFH615A-3X001 SFH615A-4X001 DIP-4, 400 mil, option 6 SFH615A-1X016 SFH615A-2X016 SFH615A-3X016 SFH615A-4X016 (1) (1) (1) SMD-4, option 7 SFH615A-1X017T SFH615A-2X017T SFH615A-3X017 SFH615A-4X017T SMD-4, option 9 - SFH615A-2X019T - - Notes Additional options may be possible, please contact sales office. (1) Also available in tubes do not add T to end. Rev. 1.2, 12-Oct-12 Document Number: 83433 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 SFH615A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V 6V R DC forward current I 60 mA F Forward surge current t 10 s I 2.5 A p FSM LED power dissipation at 25 C P 70 mW diss OUTPUT Collector emitter voltage V 70 V CEO Emitter collector voltage V 7V ECO Collector current I 50 mA C Collector peak current t /T = 0.5, t 10 ms I 100 mA p p CM Ouput power dissipation at 25 C P 150 mW diss COUPLER Isolation test voltage t = 1 s V 5300 V ISO RMS between emitter and detector Creepage distance 7mm Clearance distance 7mm Isolation thickness between emitter and 0.4 mm detector Comparative tracking index CTI 175 per DIN IEC 112/VDE 0303, part 1 12 V = 500 V, T = 25 C R 10 IO amb IO Isolation resistance 11 V = 500 V, T = 100 C R 10 IO amb IO Operation temperature T - 55 to + 100 C amb Storage temperature range T - 55 to + 150 C stg (1) Soldering temperature 2 mm from case, 10 s T 260 C sld Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I = 60 mA V 1.35 1.65 V F F Reverse current V = 6 V I 0.01 10 A R R Capacitance V = 0 V, f = 1 MHz C 13 pF R O OUTPUT Collector emitter capacitance V = 5 V, f = 1 MHz C 5.2 pF CE CE SFH615A-1 I 250 nA CEO SFH615A-2 I 250 nA CEO Collector emitter leakage current V = 10 V CE SFH615A-3 I 5 100 nA CEO SFH615A-4 I 5 100 nA CEO COUPLER Collector emitter saturation voltage I = 10 mA, f = 1 MHz V 0.25 0.4 V F CEsat Coupling capacitance C 0.4 pF C Note Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Rev. 1.2, 12-Oct-12 Document Number: 83433 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000