VBUS54DD-HS4 www.vishay.com Vishay Semiconductors 4-Line BUS-Port ESD Protection FEATURES Ultra compact LLP1010-6M package Low package height < 0.4 mm 5 4 4-line USB ESD protection 6 Low leakage current Low load capacitance C = 0.8 pF D 1 2 3 ESD immunity acc. IEC 61000-4-2 15 kV contact discharge 20897 20896 15 kV air discharge Pin plating NiPdAu (e4) no whisker growth Material categorization: for definitions of compliance MARKING (example only) please see www.vishay.com/doc 99912 XY 20932 Dot = pin 1 marking X = date code Y = type code (see table below) click logo to get started DESIGN SUPPORT TOOLS Models Available ORDERING INFORMATION TAPED UNITS PER REEL DEVICE NAME ORDERING CODE MINIMUM ORDER QUANTITY (8 mm TAPE ON 7 REEL) VBUS54DD-HS4 VBUS54DD-HS4-G4-08 5000 5000 PACKAGE DATA PACKAGE TYPE MOLDING COMPOUND MOISTURE DEVICE NAME WEIGHT SOLDERING CONDITIONS NAME CODE FLAMMABILITY RATING SENSITIVITY LEVEL MSL level 1 VBUS54DD-HS4 LLP1010-6M D 1.07 mg UL 94 V-0 Peak temperature max. 260 C (according J-STD-020) ABSOLUTE MAXIMUM RATINGS VBUS54DD-HS4 PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Pin 1, 3, 4 or 5 to pin 2 or 6 Peak pulse current I 3A PPM acc. IEC 61000-4-5 t = 8/20 s single shot p Pin 1, 3, 4 or 5 to pin 2 or 6 Peak pulse power P 57 W PP acc. IEC 61000-4-5 t = 8/20 s single shot p Contact discharge acc. IEC 61000-4-2 10 pulses 15 kV ESD immunity V ESD Air discharge acc. IEC 61000-4-2 10 pulses 15 kV Operating temperature Junction temperature T -40 to +125 C J Storage temperature T -55 to +150 C STG Rev. 1.5, 04-Jan-2019 Document Number: 83384 1 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VBUS54DD-HS4 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS VBUS54DD-HS4 (Pin 1, 3, 4, or 5 to pin 2 or 6) (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of lines which can be protected N - - 4 lines channel Reverse stand-off voltage V -- 5.5 V RWM Reverse current at V = V = 5.5 V I - < 0.01 0.1 A IN RWM R Reverse breakdown voltage at I = 1 mA V 6.9 8 8.7 V R BR Reverse clamping voltage at I = 3 A acc. IEC 61000-4-5 V -16 19 V PP C Forward clamping voltage at I = 3 A acc. IEC 61000-4-5 V -3.5 4.5 V F F V = 0 V any other I/O pin at 3.3 V -0.8 1 pF IN Capacitance C D V = 2.5 V any other I/O pin at 3.3 V - 0.5 0.8 pF IN APPLICATION NOTE With the VBUS54DD-HS4 a double, high speed USB-port or up to 4 other high speed signal or data lines can be protected against transient voltage signals. Negative transients will be clamped close below the ground level while positive transients will be clamped close above the working range. The high speed data lines, D +, D +, D - and D -, are connected to pin 1, 3, 4, and 1 2 1 2 5, pin 2 or 6 are connected to ground. As long as the signal voltage on the data lines is between the ground- and the break down level, the low input capacitance of each channel offers a very high isolation to ground and to the other data lines. But a s soon as any transient signal exceeds this working range, the VBUS54DD-HS4 clamps the transient to ground or to the avalanche break down voltage level. t V R BUS w E D 1+ i C D n 1- E 5 4 I U 6 V S E B R 2 - 1 3 P D 2+ IC o D 2- r t GND 20897-1 TYPICAL CHARACTERISTICS T = 25 C, unless otherwise specified amb 120 % 100 % 8 s to 100 % Rise time = 0.7 ns to 1 ns 100 % 80 % 80 % 60 % 60 % 20 s to 50 % 53 % 40 % 40 % 27 % 20 % 20 % 0 % 0 % -10 0 10203040 50607080 90100 010 20 30 40 20548 Time (ns) Time (s) 20557 Fig. 1 - 8/20 s Peak Pulse Current Wave Form Fig. 2 - ESD Discharge Current Wave Form acc. IEC 61000-4-5 acc. IEC 61000-4-2 (330 /150 pF) Rev. 1.5, 04-Jan-2019 Document Number: 83384 2 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 I PPM Discharge Current I ESD