VO2223A www.vishay.com Vishay Semiconductors Optocoupler, Power Phototriac FEATURES Maximum trigger current (I ): 10 mA FT 8 1 Isolation test voltage 5300 V RMS 2 Peak off-state voltage 600 V Load current 1 A 6 RMS 3 dV/dt of 210 V/s 5 4 DIP-8 package 21081-4 V Pure tin leads DE 2317123171 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS PIN FUNCTION 1LED cathode Home appliances (air conditioners, microwave ovens, washing machines, personal hygiene systems, 2LED anode refrigerators, fan heaters, inductive heating cooker, water 3LED cathode heaters, etc.) 4LED cathode Industrial equipments 5Triac gate 6Triac T1 AGENCY APPROVALS 8Triac T2 UL / cUL 1577 DIN EN 60747-5-5 (VDE 0884-5), available with option 1 DESCRIPTION The VO2223A is an optically couple phototriac driving a power triac in a DIP-8 package. It provides a 5300 V of input to output isolation. ORDERING INFORMATION DIP-8 Option 7 V O 22 23 A - X 0 0 PART NUMBER PACKAGE OPTION 7.62 mm > 0.7 mm AGENCY CERTIFIED / PACKAGE TRIGGER, CURRENT I (mA) FT UL, cUL 10 DIP-8 VO2223A DIP-8, option 7 VO2223A-X007T UL, cUL, VDE (option 1) 10 DIP-8 VO2223A-X001 Rev. 1.6, 07-May-2021 Document Number: 81924 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VO2223A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT LED continuous forward current I 50 mA F LED reverse voltage V 5V R OUTPUT Repetitive peak off-state voltage Sine wave, 50 Hz to 60 Hz, gate open V 600 V DRM On-state RMS current I 1A T(RMS) Peak non-repetitive surge current (50 Hz, peak) I 10 A TSM COUPLER (2) Total power dissipation P 1.2 W diss Ambient temperature range T -40 to +85 C amb Storage temperature range T -40 to +125 C stg (1) Soldering temperature t 10 s max. T 260 C sld Isolation test voltage For 1 s V 5300 V ISO RMS Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability (1) Refer to wave profile for soldering conditions for through hole devices (2) Total power dissipation value is based on 2S2P PCB ABSOLUTE MAXIMUM RATING CURVES 1.2 80 1.0 60 0.8 0.6 40 0.4 20 0.2 0 0 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 120 60 80 100 21354 21296 T - Ambient Temperature (C) T - Ambient Temperature (C) amb amb Fig. 1 - Power Dissipation vs. Temperature Fig. 2 - Allowable Load Current vs. Ambient Temperature Note The allowable load current was calculated out under a given operating conditions and only for reference: LED power: Q = 0.015 W, (4-layer) = 30 C/W E BA Rev. 1.6, 07-May-2021 Document Number: 81924 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 P - Input Power Disspation (mW) diss I - RMS On-State Current (A) T(RMS)