VS-20ETF...-M3 Series www.vishay.com Vishay Semiconductors Fast Soft Recovery Rectifier Diode, 20 A FEATURES Base 2 Glass passivated pellet chip junction cathode 2 150 C max operating junction temperature Low forward voltage drop and short reverse recovery time 1 Designed and qualified according to 1 3 3 Cathode Anode JEDEC -JESD 47 2L TO-220AC Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 PRIMARY CHARACTERISTICS APPLICATIONS I 20 A F(AV) These devices are intended for use in output rectification V 200 V, 400 V, 600 V R and freewheeling in inverters, choppers and converters as V at I 1.3 V F F well as in input rectification where severe restrictions on I 300 A FSM conducted EMI should be met. t 60 ns rr DESCRIPTION T max. 150 C J Snap factor 0.6 The VS-20ETF0... fast soft recovery rectifier series has been Package 2L TO-220AC optimized for combined short reverse recovery time and low forward voltage drop. Circuit configuration Single The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS V Range 200 to 600 V RRM I Sinusoidal waveform 20 F(AV) A I 300 FSM t 1 A, 100 A/s 60 ns rr V 10 A, T = 25 C 1.2 V F J T Range -40 to +150 C J VOLTAGE RATINGS V , MAXIMUM PEAK REVERSE V , MAXIMUM NON-REPETITIVE I RRM RSM RRM PART NUMBER VOLTAGE PEAK REVERSE VOLTAGE AT 150 C V V mA VS-20ETF02-M3 200 300 VS-20ETF04-M3 400 500 5 VS-20ETF06-M3 600 700 ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current I T = 97 C, 180 conduction half sine wave 20 F(AV) C 10 ms sine pulse, rated V applied 250 A Maximum peak one cycle RRM I FSM non-repetitive surge current 10 ms sine pulse, no voltage reapplied 300 10 ms sine pulse, rated V applied 316 RRM 2 2 2 Maximum I t for fusing I t A s 10 ms sine pulse, no voltage reapplied 442 2 2 2 Maximum I t for fusing I t t = 0.1 to 10 ms, no voltage reapplied 4420 A s Revision: 23-Nov-17 Document Number: 96213 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000VS-20ETF...-M3 Series www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUESUNITS Maximum forward voltage drop V 20 A, T = 25 C 1.3 V FM J Forward slope resistance r 12.5 m t T = 150 C J Threshold voltage V 0.9 V F(TO) T = 25 C 0.1 J Maximum reverse leakage current I V = Rated V mA RM R RRM T = 150 C 5.0 J RECOVERY CHARACTERISTICS PARAMETER SYMBOLTEST CONDITIONS VALUESUNITS I FM Reverse recovery time t 160 ns rr I at 20 A t F pk rr Reverse recovery current I 100 A/s 10 A rr t t a b t 25 C dir Reverse recovery charge Q 1.25 C rr dt Q rr Snap factor S Typical 0.6 I RM(REC) THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUESUNITS Maximum junction and storage T , T -40 to +150 C J Stg temperature range Maximum thermal resistance, R DC operation 0.9 thJC junction to case Maximum thermal resistance, R 62 C/W thJA junction to ambient Typical thermal resistance, R Mounting surface, smooth, and greased 0.5 thCS case to heatsink 2g Approximate weight 0.07 oz. minimum 6 (5) kgf cm Mounting torque (lbf in) maximum 12 (10) 20ETF02 Marking device Case style 2L TO-220AC 20ETF04 20ETF06 Revision: 23-Nov-17 Document Number: 96213 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000