Programming module and software for Wachendorff panel meters and controller TA/TH/TI/UA/UR/VZ/ZD Installation manual Version 2.0 July 2013 Copyright by Wachendorff Prozesstechnik GmbH & Co. KG, Industriestrae 7, D-65366 Geisenheim, Tel.: +49-6722/9965-20, Fax: -78. All Information without warranty, errors and changes reserved. Programming kit SFUR0KIT 1. Introduction Dear valued Customer Thank you for purchasing and using a product from our company. The Programming kit SFUR0KIT from Wachendorff Prozesstechnik GmbH Co.KG can be used for the programming of Wachendorff panel meters and controllers. For getting the highest effort out of this unit, we kindly ask you to follow the mentioned instructions below: Every person who is involved with the installation or usage of this unit, must carefully read and understand the installation manual and safety instructions 2. Safety instructions 2.1 General information To ensure the safe operation of this unit the instructions that appear in this manual must be strictly observed. In addition, when used all applicable legal and safety regulations for the respective application must be observed. The same applies correspondingly to the use of accessories. 2.2 Intended usage The Programming kit SFUR0KIT from Wachendorff Prozesstechnik GmbH Co.KG can be used for the programming of Wachendorff panel meters and controllers of the series TA/TH/TI/UA/UR/VZ/ZD. Any other use is regarded not in accordance with the intended usage. Units from Wachendorff must only be operated in accordance with the technical specifications by qualified personnel. Personnel regarded qualified is familiar with the installation, assembly, putting into operation and operation of the units and possesses adequate professional qualification for the task 2.3 Qualified personnel The programming module must only be operated in accordance with the technical specifications by qualified personnel. Personnel regarded qualified is familiar with the installation, assembly, putting into operation and operation of the units and possesses adequate professional qualification for the task. 2.4 Remaining hazards The Programming kit SFUR0KIT from Wachendorff is state of the art and safe to operate. A risk of danger can occur when deployed and operated improperly by untrained personnel. In this manual remaining hazards are marked by the following warning symbol: This symbol indicates that non-observance of the safety guidelines may cause hazards to persons even serious injury or death and/or the possibility of property damage. 2.5 Legal responsibility Liability for material defects and defects of this documentation, particularly for the accuracy, correctness, freedom of protection or third party rights, completeness and/or usability - except for willful misconduct or gross negligence - is excluded. 2.6 CE-Conformity The CE certificate is available at our company. We are pleased to send you a copy of it. Please feel free and contact us to get a copy. 1